Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Service manual Subzero 680/F


micgla

Recommended Posts

I thought i needed the 690 manual but i misread the model number and its really the 680/F. Serial number is P1541352. The area i'm looking for is the water and ice thru the door feature on the refrigerator door. I can't find this in the 600 series manual. Are there different manuals or are they the same? Sorry for the confusion. thanks for your help and patience..

Link to comment
Share on other sites

  • Replies 10
  • Created
  • Last Reply

Top Posters In This Topic

  • RegUS_PatOff

    5

  • micgla

    4

  • ey11428

    1

  • catservices

    1

did you check the 600-1 Addndm & PARTS.pdf manual ?

Link to comment
Share on other sites

I went thru the manual (both). I am dumbfounded. I cannot find anything on diagnosing or removal of the water thru the door feature on the 680.

Link to comment
Share on other sites

did you see the wiring diagtrams for the 680 ?

It looks like you'd have to test for the signals at the Ice Dispense Control Board

Link to comment
Share on other sites

It's part of the diagram # 132 Door Dispenser Assembly part # 4200960

as mentioned on PDF pages 158 & 159

4200960 Door Dispenser Assembly at RepairClinic.com

click on picture

00517084.jpg

Link to comment
Share on other sites

  • 1 month later...

Hello, could you please forward me manual for the 680/f as well?

thanks

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...