Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Whirlpool LTE5243DQ5 service manual


repairman2

Recommended Posts

repairman2

I have a washer/dryer stack that fills with water but will not agitate or spin.I can hear the motor hum. I removed the pump , changed the timer and got the same results. Can someone please help me with a repair manual and help with what the problem may be.  Peace  :(

Link to comment
Share on other sites

  • Replies 7
  • Created
  • Last Reply

Top Posters In This Topic

  • kdog

    3

  • repairman2

    3

  • RegUS_PatOff

    1

  • certified tech group 51

    1

Popular Days

Top Posters In This Topic

While in spin, will it drain if water is in the tub??  It may be your coupler is broken......

Link to comment
Share on other sites

[user=60680]repairman2[/user] wrote:

I can hear the motor hum.
Link to comment
Share on other sites

When you look at the shaft with the pump removed, is it spinning?

Link to comment
Share on other sites

you could remove the Pump and the Motor and while holding the Motor with your foot,

try the Washer again ...

With power removed, can you turn the Motor Shaft by hand, easily, smoothly ? 

Link to comment
Share on other sites


×
×
  • Create New...