Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Need Manual: Amana 25 SXD25JBL Refrigerator


RiverDawg

Recommended Posts

The manual should help with the following, but I'll mention:

Specifically, I'm trying to replace the controller and can't tell how to get the housing out of the way without breaking it. (It's a side by side with the two-knobbed control housing at the upper left of the frig--which is on the right side.) I see plastic tabs at the bottom of the housing that reach through holes in the back of the interior wall, but can't figure out how to get them loose; pulling the unit out etc. would be a major pain here. Also can't tell how to get the thermostat wire out of its plastic tube running into the freezer. Will ask at the parts place Friday but will also cross post this (hoping that's okay) on the thread with which I began.

Thanks, Samurai and followers. This is a great site and I've been spreading the news to friends. As I hope to pick up the magic part tomorrow in Denver (rather than wait the weekend for part by mail), I will donate extra beer money once I git'er done.

Link to comment
Share on other sites

  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

  • RegUS_PatOff

    1

  • RiverDawg

    1

Popular Days

Top Posters In This Topic

see PDF page 61

Freezer Temperature Control (Nonelectronic Models)

1. Remove control knobs.

2. Loosen brace on bottom left of cover to allow cover to be rotated forward.

3. Pull bottom of cover out until it unsnaps.

Continue tilting cover out until top tabs release and remove cover.

4. Remove two control mounting screws.

5. Remove sealer from control capillary well.

NOTE: Replace sealer during reassembly.

6. Pull control out of bracket.

7. Disconnect wiring from rear of control.

8. Remove capillary from well and remove control.

similar model:

Service Manual RS1300003 Side-by-Side S Model Refrigerators

Link to comment
Share on other sites


×
×
  • Create New...