Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

service manual wascomat 185


certified tech group 51

Recommended Posts

Have not been to the unit yet, would like to have a manual on hand..thanks

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • certified tech group 51

    2

  • appl.tech.29501

    1

  • fixyourboard

    1

Top Posters In This Topic

down loading as I type....Talked to the mgr. at the motel.... the problem is..............no  full rpm at final spin, clothes still wet...............will read it tomorrow in the  morning in the "office"...............thanks............

Link to comment
Share on other sites

I've found the guys at the Wascomat factory (NY if i recall) to be very helpful. I've needed wiring diagrams for some of their models for our test benches as we rebuild some of the wasco boards. If you need it, maybe I can find the contact info in my notes.

Link to comment
Share on other sites


×
×
  • Create New...