Troubleshoot modern appliances with confidence…

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
  • Announcements

    • Samurai Appliance Repair Man

      [Webinar] Basic Refrigeration Sealed System Thermodynamics   09/21/2017

      See this calendar event for details:                   
    • Samurai Appliance Repair Man

      Webinar Recordings Index Page   09/21/2017

      One of the benefits of your Professional Appliantologist membership is that you can attend the regular, live training webinars and you have access to the recordings as well. So if you can't make it to the live webinar, catch the recording at your convenience. The webinar recordings are conveniently listed for you on the Webinar Recordings Index Page.   

Archived

This topic is now archived and is closed to further replies.

silark

Do I need a new water heater?

Recommended Posts

silark   
silark

I found we did not have any hot water the other night so suspecting the pilot had blown out I went down and it had so I lit it and turned it on. I heard the main burner light. The next day we still had no hot water so I checked again and the pilot light was out. This time I watched what happened when I turned the heater on:

1. pilot stays on after releasing the pilot button

2. turn the heater on and the pilot light goes out and the main burner does not ignite

After several attempts the same thing happens time and time again and I notice as I am switching the heater on the pilot light lowers the closer I get to the on position. I did manage to get it lit by slowly turning the valve to on and just at the point the pilot light was about to go out the main burner lit but seemed to splutter for want of a better word. It just wasn't a constant flame it seemed to pulse. Anyway after coming home about two hours later the main burner is out and the pilot is still lit. From my research the thermocouple is ok if the pilot light stays lit so is this a case of a new heater or a good clean because something is obstructing the gas?

My concern which is why I turned the pilot out is that whlist the pilot stays lit heating the thermo couple does that mean gas is still being released but not burnt?

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

silark   
silark

Ok so I just had a thought that the main burner should be off as the water had reached it's desired temp. Is this correct? If so what you make of the other stuff?

Share this post


Link to post
Share on other sites