Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Maytag sidexside MSD2732GRW


wolfbrother60

Recommended Posts

wolfbrother60

LAST Call,Before I Haul! Workin to set this Maytag "straight",after EIGHT,trips that is! Need,and finally got "flashplayer" to send pictures of ICE/FRost on EVAP! Will attempt transfer images via imageshack!Still gotta figer out the "Link" to my original post: To Freeze,Or Not!

Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • RegUS_PatOff

    2

  • wolfbrother60

    2

  • appl.tech.29501

    1

Popular Days

Top Posters In This Topic

wolfbrother60

[user=3641]RegUS_PatOff[/user] wrote:

[user=71920]canislooped60[/user] wrote:
... Still gotta figer out the "Link" to my original post: To Freeze,Or Not!

http://applianceguru.com/forum1/27820.html  :snooze:

Imageshack? I can't get ANYTHING from there to HERE! "Javascript void",I get everything but,How to send them here.Been trying for TWO weeks! Got lotsa pictures of the Maytag MSD2732GRW sidexside Evap Ice/Frost! Access to the Compressor is "next" to impossible.Unit Is "Squeezed" between a Partition and DryerW

Link to comment
Share on other sites

at ImageShack, view the picture, then in the right column,

under "Embed this image" click on the Forum URL, then right-click, copy

 

paste that link into your message

Link to comment
Share on other sites


×
×
  • Create New...