Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Inter-City {TempStar} NTC 5100BFC1 Forced Air Furnace


Guest RJ Kanary_old

Recommended Posts

Guest RJ Kanary_old

If there is indeed a Service Manual for this unit, I'd like to obtain a copy BEFORE it's needed. :)

Figuring out how to remove the blower for a cleaning is high on my list, and I'd like to perform that task with the fewest number of innocent bystanding pieces destroyed as possible. <VBG>

The fragile sand based controls have been protected by a three metal oxide varistor array that I installed shortly after the installer left,back in October of 1995.

Thanks,

RJ

Link to comment
Share on other sites

  • Replies 0
  • Created
  • Last Reply

Popular Days


×
×
  • Create New...