Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Whirlpool GS563LXSQ0

vee8power

By vee8power
in Appliance Service Manual Requests Forum

 Share

Recommended Posts

vee8power Sensei

vee8power

Posted
Posted

Anybody have a tech sheet/wiring diagram for a model like this. It's a gas range with spark-ignition oven. Got sheet #9761386 off scribd. Close enough? Thanks in advance!

Link to comment
Share on other sites
  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • Samurai Appliance Repair Man

    1

  • RegUS_PatOff

    1

  • vee8power

    1

Popular Days

Top Posters In This Topic

Popular Days

  • Team Samurai
Samurai Appliance Repair Man Sensei

Samurai Appliance Repair Man

Posted
  • Team Samurai
Posted

Tech sheet should be cleverly hidden in the range: pots drawer cavity, back of range, poke around, you'll find it.

Here's some troubleshooting help on the gas valve:

5241931850_329ab3d362_z.jpg

Whirlpool DSI Gas Range GS563LXS - Bake and Broil Solenoid Activated Ports

Troubleshooting Tips:

Both coils on the gas valve have to have continuity or it will not work. The DSI control checks this before it does a function. Also these coils are LOW VOLTAGE DC 8 to 18 VDC.

If you have 120v coming out of the ERC & in to the new DSI board at Bake J1-6 or Broil J1-7 then you know the ERC is calling for heat properly.

At the gas valve, remove the wires and ohm from the center terminal (Common) to the upper one (Broil); then from the center terminal (Common) to the lower one (Bake). If either one is open then you need a gas valve==> http://www.repairclinic.com/PartDetail/Gas-Valve-Assembly/1159151?modelNumber=GS563LXSQ0

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...