Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

frigidaire electic stove fef326awa

court

By court
in Appliance Service Manual Requests Forum

 Share

Recommended Posts

  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

  • court

    4

  • RegUS_PatOff

    3

Popular Days

Top Posters In This Topic

Popular Days

RegUS_PatOff Sensei

RegUS_PatOff

Posted
Posted

thanks for the reply,but i couldn't down load it

click where it says ""Click here to start download.."
Link to comment
Share on other sites
court

court

Posted
  • Author
Posted

thanks it down loaded this time,but my problem is i set temp at 350,but it only gets to 317 inside oven.on some models you run temp all the up wile still holding the button in until off set flashs.this model doesn't

Link to comment
Share on other sites
RegUS_PatOff Sensei

RegUS_PatOff

Posted
Posted

sorry, wrong manual ...

Calibration:

To check oven calibration:

1. Place a thermometer or thermocouple in the center of the oven.

2. Program the oven for bake and the temperature to 350° F.

Allow the oven to cycle three times.

3. Average the highest and lowest readings.

The average should be within 10° of 350° F.

The calibration of the ES 100 system cannot be adjusted:

1. If the oven temperature calibration is off.

Check the resistance of the oven sensor circuit against the chart below.

If the sensor circuit checks good replace the control.

Degrees F . . . . . .Resistance (Ohms)

32 +/- 1.9 . . . . . . . 1000 +/- 4.0

75 +/- 2.5 . . . . . . . 1091 +/- 5.3

250 +/- 4.4 . . . . . . .453 +/- 8.9

350 +/- 5.4 . . . . . . 1654 +/- 10.8

450 +/- 6.9 . . . . . . 1852 +/- 13.5

550 +/- 8.2 . . . .. . . 2047 +/- 15.8

650 +/- 9.6 . . . . . . .2237 +/- 18.5

900 +/- 13.6 . . . . . .2697 +/- 24.4

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...