Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

fisher pykel model dd603-ss-usa


Recommended Posts

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • Samurai Appliance Repair Man

    1

  • RegUS_PatOff

    1

  • efmca

    1

  • moholte

    1

Top Posters In This Topic

  • 1 month later...

I saw on this post that a service manual for Fisher& Paykel DD603/DS603 are available. It is possible to have a set of these emailed to my email address (Mark.Holte@ch2m.com) my compnay has this pdf site under our corporate firewall. I have a double drawer setup that has return the error F1 with wrench icon listed in the user's manual that a float switch has been activated. I would like to see if this is repairable by me. I have installed and repair appliances as well as work on other electronic items over the years and would like to see if this is something I can do before calling an F&P technician.

Thank you

Link to comment
Share on other sites

  • Team Samurai

Copy the URL in Reg's post and then email it to yourself. Problem solved!

Link to comment
Share on other sites


×
×
  • Create New...