Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

firgidaire fam157s1aa


fridaire69

Recommended Posts

fridaire69

Installed a new power control board.It fixed the problem yea not. Turned off the unit back to square one no power and nothing on display.Power control must be shorting but what is the cause?

Link to comment
Share on other sites

  • Replies 5
  • Created
  • Last Reply

Is there voltage into and out of the Transformer ?

Link to comment
Share on other sites

fridaire69

Not sure how to test it.I tried to test it just now could not get a reading ,but shortly after it turned on for 10 secs then turned off again. its a ghost lol

Link to comment
Share on other sites

fridaire69

Had it unplugged for awhile plugged it back in and it turned on for 10 secs then powered off completely.Is it the main board?

Link to comment
Share on other sites

  • Team Samurai

Moved from Laundry forum to HVAC forum.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...