Lost with the new appliances? The Samurai teaches you Circuit Fu…

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
Sign in to follow this  
Followers 0

Thermostat Installation Westinghouse (Nordyne) FT5BD-030K

2 posts in this topic


We currently had a Honeywell Digital TH5220D1003 (non programmable) thermostat (link here: Product) on our downstairs Westinghouse (Nordyne) FT5BD-030K HVAC (link here: WESTINGHOUSE FT5BD-030K Heat Pumps). There is a separate unit for the upstairs. It was working fine. Then we wanted to install a new honeywell digital thermostat (model RTHL2310) that was programmable (link to product here: RTHL2310B | 5-2-Day Programmable Thermostat).

I removed the wires and labeled them. They are either:

Conventional (which I assumed to the correct one)

R (red wire), Y (yellow wire), C (blue wire), W (red wire), G (green wire), W2 (white wire)


Heat Pump

R (red wire), Y (yellow wire), C (blue wire), O/B (red wire), G (green wire), Aux (white wire)

Next I connected the new thermostat as follows matching the conventional labels above:

R (red wire), W (red wire), Y (yellow wire), G (green wire). I did nothing with C (blue wire) or W2 (white wire).

The result was that the unit just blew warm air. I then hooked the old thermostat back up and still no cooling.

So I believe the Westinghouse is not working period and I do not have the wiring correct.

Any direction would be greatly appreciated!

Thank you,

DuBose Griffin

Share this post

Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

Odd T-wire you've got there. With two reds it would be easy enough to get them turned around. Verify color codes at the the compressor (or air handler) terminal strip. Verify which Red is hot at the thermostat with a multimeter. You're looking for 24VAC to Common.

Edited by jb8103

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0