Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Fisher paykel intuitive dryer DEIX2, fault codes service manual and schematic desperately needed!

robertparker

By robertparker
in Appliance Service Manual Requests Forum

 Share

Recommended Posts

robertparker Ikkō-ikki

robertparker

Posted
Posted

Oh most venerable one, please if you would, open my eyes to the baffling wonder of this machine. Machine gave fault 6, now giving fault 12.

Link to comment
Share on other sites
  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

  • RegUS_PatOff

    1

  • robertparker

    1

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

RegUS_PatOff
RegUS_PatOff

Fault Code 6 Door Jammed – (User Warning). The door is unable to close due to either clothes catching or an excessive closing load. Remedy: (1) Remove the obstruction. (2) Reposition or remove some of

RegUS_PatOff Sensei

RegUS_PatOff

Posted
Posted

Fault Code 6 Door Jammed – (User Warning).

The door is unable to close due to either clothes catching or an excessive closing load.

Remedy: (1) Remove the obstruction.

(2) Reposition or remove some of the load.

(3) Fix the cause of binding in the door closing mechanism.

(4) Replace the motor.

Fault Code 12 Lid Lock Switching Device Failure.

Remedy: Check that there are no short circuits in the lid lock circuit which may have caused the failure in the sensor module.

The resistance of the lid lock should be between 50 and 100 ohms.

If the circuit is correct, replace the sensor module.

service manual

link PM'd

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...