Troubleshoot modern appliances with confidence…

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
  • Announcements

    • Samurai Appliance Repair Man

      Webinar Recordings Index Page   10/03/2017

      On-demand appliance repair training videos for Professional Appliantologist members Over 30 hours (and growing!) of original, high quality appliance training webinars developed and given by yours truly are at your fingertips, on topics you won't find anywhere else. Fill in those knowledge gaps, strengthen those areas of uncertainty, and boost your skills. Watch on mobile or desktop at your convenience whenever, wherever.  Ultra Short Primer on Basic Electricity, Circuits, Ohm's Law, and Schematic Reading (Length: 1:04:48) Basic Refrigerator Troubleshooting (Length: 1:10:45) Schematic Reading Workshop, 10/2015 (Length 1:19:08) Troubleshooting Strategies for Computer-Controlled Appliances (Length: 48:34) Semiconductors and PN Junctions (Length: 1:04:37) Appliance Temperature Sensing Devices & Technology (Length: 1:27:33) Voltage Measurements, Meters, Ghost Voltages, and Triac-controlled Neutrals (Length: 1:29:32) Troubleshooting with Tech Sheets, Part 1, 4/2016 (Length: 1:09:26) Troubleshooting with Tech Sheets, Part 2, 4/2016 (Length: 1:21:11) Tech Sheet Review, 4/9/2016: Bosch Speed Cooker, Amana Refrigerator, GE Glass Cooktop Range (Length: 1:22:58) Pulse Width Modulated (PWM) Switches used in Samsung Switched Mode Power Supplies (SMPS) (Length: 27:07) PWM Computer Cooling Fan in a Whirlpool Refrigerator (Length: 14:53) Understanding AC Split-phase Household Power Supplies (Length: 52:41) Troubleshooting a Samsung Electric Dryer without Disassembly using Live Tests and the Schematic (Length: 22:47) Troubleshooting a Bosch Dishwasher No-Heat Problem using the Schematic and Live Tests (Length: 15:38) Linear Motors and Linear Compressors (Length: 55:54) Bi-directional PSC Drive Motor Systems in Whirlpool VM Washers (Length: 56:52) Appliance Service Call Structure and Troubleshooting Strategies (Length: 1:00:16) The Ten Step Troubleshooting Tango and Workshop Exercises (Length: 1:35:39) Troubleshooting Ten-Step Tango Advanced Workshop (Length: 1:32:06) Ten-Step Tango Troubleshooting Workshop: Refrigerators (Length: 1:35:57) Whirlpool Duet Washer Schematic Analysis & Whirlpool Dryer Moisture Sensor System (Length: 1:03:04) Neutral Vs. Ground, Inverter Microwave, Digital Communications, Loading Down in DC loads, and more! (Length: 1:14:45) Gas Oven Service Call After a Parts Changing Monkey (Length: 36:04) AFCI and GFCI Circuit Protection Technology (Length: 41:26) Troubleshooting Samsung Refrigerators and more (Length: 1:29:58) 3-way Valves and Dual Evaporator Refrigerators (Length: 1:15:45) Split-Phase Compressors and PTC Start Devices (Length: 1:11:57) Gas Dryer Ignition Systems (Length: 53:50) Refrigerator Sealed System Thermodynamics, Part 1 (Length: 43:07) Refrigerator Sealed System Thermodynamics, Part 2 (Length 1:09:09) To access these webinars and all the other info-goodies here at Appliantology, become a Professional Appliantologist today. If you need cost-effective, time-flexible, state-of-the-art appliance technical training, check out the Master Samurai Tech Academy.
    • Samurai Appliance Repair Man

      Master Samurai Tech Radio Episode 21 – Battle of the Titans: Samsung, Whirlpool, Kenmore, and Amazon   10/11/2017

      In this episode: Industry News: Employment numbers for the appliance repair industry Whirlpool lawsuit against Samsung because Samsung is kicking Whirlpool's corporate *ss on front load washers Samsung opening a new, state-of-the-art $380 million manufacturing facility in South Carolina Kenmore appliances on Amazon Appliantology monthly workshops: https://appliantology.org/calendar/event/822-webinar-appliantology-workshop-using-appliantology-as-your-indispensable-appliance-repair-information-tool/ Refrigerator sealed system repairs: what you really need to know https://appliantology.org/blogs/entry/999-sealed-system-repairs-the-mystique-the-reality/ Top Kendo Master at Appliantology each month wins $100! https://appliantology.org/blogs/entry/1000-the-top-kendo-master-each-month-wins-100/ Oven and Range repair training course- just in time for cooking season https://mastersamuraitech.com/appliance-repair-courses/oven-range-repair/ You can listen to just the audio portion by subscribing to the podcast here.
Hozer

Rheem gas furnace burners will not ignite

Recommended Posts

Hozer

Checked the thermostat by jumpering the red and white wires and get nothing, air conditioning works compressor and blower come on when you turn the temperature down, blower works in the fan on position, pilot light stays on so thermalcouple should be good, 24 volts coming from transformer.

Burners will not ignite in the heat setting when temperature is turned up and no noise when the temperature is turned up and held.

what could be wrong?

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

RegUS_PatOff

is there 24v AC between Red and White ?

Furnace model number ?

Share this post


Link to post
Share on other sites
Hozer

I don't know, will check. Model Number RCDA-075A-AR

What if there isn't 24v between red and white, what then

Share this post


Link to post
Share on other sites
applianceman18007260692

If you ain't gettin 24 volts to the gas valve solenoid she won't fire off. Might be a tripped limit somewhere. Post some photos of the pilot the gas valve and the furnace. Lookin up HVAC sucks.

Share this post


Link to post
Share on other sites
Hozer

How do you fix a tripped limit

The file on my pic is too large to post, can I email to you?

Share this post


Link to post
Share on other sites
applianceman18007260692

I don't know about email. I had a guy send me a zip file once and spent the rest of the night fixin that.

Does it have a control boaard

does it have a pilot light or a ignitor?

Share this post


Link to post
Share on other sites
Hozer

I don't think it has a control board, It has a pilot light not an ignitor

Share this post


Link to post
Share on other sites
RegUS_PatOff

is there 24v AC between Red and White ?

Share this post


Link to post
Share on other sites
applianceman18007260692

In that case send it to: sublimemasterjw@rocketmail.com

Or post it to my facebook wall

Edited by applianceman18007260692

Share this post


Link to post
Share on other sites
Hozer

Red and white wires do not have any voltage

Share this post


Link to post
Share on other sites
Hozer

any updates, Red and White wires do not have any voltage between them

Share this post


Link to post
Share on other sites
kdog

If the 24 volts is not present, you have a failed transformer or one of the rollout thermosats has been tripped as applianceman had mentioned

  • Like 1

Share this post


Link to post
Share on other sites
Shootist

Nothing wrong with the transformer if the A/C runs. On a pilot furnace you're either getting 24v to the 2 wires plugged onto the gas valve or you're not. If you're getting 24v and the valve isn't opening then the valve is bad. If you're not getting 24v and you have red and white jumpered at the thermostat then trace the 2 small wires back from the valve. One will go back to common, the other will go back throught the fan limit and sometimes a little roll-out sensor (or 2) above the burners. Some older horizontal furnaces have an additional limit in the blower compartment as well.

  • Like 2

Share this post


Link to post
Share on other sites
Samurai Appliance Repair Man

Posting the photo that Hozer emailed me:

20120113-mamsufxnscdy3m4rf2j1qhm4nq.preview.jpgClick for large view - Uploaded with Skitch

Share this post


Link to post
Share on other sites
jb8103

What a piece of junk.

There's the transformer right there on the left, hanging on the J-box. (Probably stapled.) Check for 24 VAC there.

Better yet, don't bother. Get a new Goodman in there.

Anyway, if you have 24 VAC at the transformer but not at the thermostat then you have a disconnect somewhere between the two devices. Do what Shootist advised, and also keep in mind that a mouse will chew through a t-wire in a heartbeat. I'd bet money on that, and I'd also bet money that old clunker does not have a terminal strip, so if you do have 24 VAC at the transformer your next move is to figure out how to jump the red and white in that spaghetti wiring in the furnace. Get that, and it should fire up, which if it doesn't, you got more than one problem.

  • Like 1

Share this post


Link to post
Share on other sites
applianceman18007260692

I see the limit above the gas valve to the left. You need to check that limit. If it is open you will have no heat. That limit would pop out due to rusted burners or partially blocked vent. As you can see in the photo the black wire on the gas valve goes to that limit then to the fan/limit then over to the transformer. So the pilot can be lit and working but no 24 volts can get to the valve if that limit is tripped.

Edited by applianceman18007260692
  • Like 3

Share this post


Link to post
Share on other sites
jb8103

You're right about that, of course, but, checking back, Hozer says he's got 24 at the transformer but not at the t-stat, so there's his problem. That was all back in November though, so I think our man is long gone, froze to death, and we're just talking to each other.

  • Like 2

Share this post


Link to post
Share on other sites
applianceman18007260692

Hopefully he ran some more wire from tstat to furnace or installed a new tstat. Wouldn't want him to freeze to death.

  • Like 1

Share this post


Link to post
Share on other sites
Shootist

Another perfect example of why folks should stop back by and let us know if we gave good advice or not. Otherwise we just have to believe that we're always brilliant. :thumbsup:

  • Like 3

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now