Learn how to troubleshoot using schematics like a real tech…

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
  • Announcements

    • Samurai Appliance Repair Man

      Webinar Recordings Index Page   10/03/2017

      On-demand appliance repair training videos for Professional Appliantologist members Over 30 hours (and growing!) of original, high quality appliance training webinars developed and given by yours truly are at your fingertips, on topics you won't find anywhere else. Fill in those knowledge gaps, strengthen those areas of uncertainty, and boost your skills. Watch on mobile or desktop at your convenience whenever, wherever.  Ultra Short Primer on Basic Electricity, Circuits, Ohm's Law, and Schematic Reading (Length: 1:04:48) Basic Refrigerator Troubleshooting (Length: 1:10:45) Schematic Reading Workshop, 10/2015 (Length 1:19:08) Troubleshooting Strategies for Computer-Controlled Appliances (Length: 48:34) Semiconductors and PN Junctions (Length: 1:04:37) Appliance Temperature Sensing Devices & Technology (Length: 1:27:33) Voltage Measurements, Meters, Ghost Voltages, and Triac-controlled Neutrals (Length: 1:29:32) Troubleshooting with Tech Sheets, Part 1, 4/2016 (Length: 1:09:26) Troubleshooting with Tech Sheets, Part 2, 4/2016 (Length: 1:21:11) Tech Sheet Review, 4/9/2016: Bosch Speed Cooker, Amana Refrigerator, GE Glass Cooktop Range (Length: 1:22:58) Pulse Width Modulated (PWM) Switches used in Samsung Switched Mode Power Supplies (SMPS) (Length: 27:07) PWM Computer Cooling Fan in a Whirlpool Refrigerator (Length: 14:53) Understanding AC Split-phase Household Power Supplies (Length: 52:41) Troubleshooting a Samsung Electric Dryer without Disassembly using Live Tests and the Schematic (Length: 22:47) Troubleshooting a Bosch Dishwasher No-Heat Problem using the Schematic and Live Tests (Length: 15:38) Linear Motors and Linear Compressors (Length: 55:54) Bi-directional PSC Drive Motor Systems in Whirlpool VM Washers (Length: 56:52) Appliance Service Call Structure and Troubleshooting Strategies (Length: 1:00:16) The Ten Step Troubleshooting Tango and Workshop Exercises (Length: 1:35:39) Troubleshooting Ten-Step Tango Advanced Workshop (Length: 1:32:06) Ten-Step Tango Troubleshooting Workshop: Refrigerators (Length: 1:35:57) Whirlpool Duet Washer Schematic Analysis & Whirlpool Dryer Moisture Sensor System (Length: 1:03:04) Neutral Vs. Ground, Inverter Microwave, Digital Communications, Loading Down in DC loads, and more! (Length: 1:14:45) Gas Oven Service Call After a Parts Changing Monkey (Length: 36:04) AFCI and GFCI Circuit Protection Technology (Length: 41:26) Troubleshooting Samsung Refrigerators and more (Length: 1:29:58) 3-way Valves and Dual Evaporator Refrigerators (Length: 1:15:45) Split-Phase Compressors and PTC Start Devices (Length: 1:11:57) Gas Dryer Ignition Systems (Length: 53:50) Refrigerator Sealed System Thermodynamics, Part 1 (Length: 43:07) Refrigerator Sealed System Thermodynamics, Part 2 (Length 1:09:09) To access these webinars and all the other info-goodies here at Appliantology, become a Professional Appliantologist today. If you need cost-effective, time-flexible, state-of-the-art appliance technical training, check out the Master Samurai Tech Academy.
    • Samurai Appliance Repair Man

      [Webinar] Samurai's Sealed System Sleuthing Secrets - 10/30/2017 @7PM ET   10/19/2017

      Having laid some theoretical groundwork in the last webinar, we're going to focus on practical considerations in this one. That means quick n’ dirty techniques for diagnosing sealed system problem using strategically chosen and skillfully interpreted temperature measurements.  Review homework from the first session on 10-2-2017. Home refrigerator practical design and operating rules-of-thumb useful for troubleshooting Practical application exercises Troubleshooting scenario exercise Techniques for making system temperature measurements for determining superheat and subcooling Sealed system diagnosis homework assignment (to be reviewed in the next webinar in this series) If you attended the first webinar in this series, this is your payday! We’re going to apply that keen, penetrating insight you now possess into money- and time-saving shortcuts you can use to diagnose real-world refrigeration systems on service calls. See this calendar event for more details                   
hanadul

Main blower issue on Gas Furnase (York Diamond 80)

Recommended Posts

hanadul

Hi,

Main blower on my furnace has stopped in 2-3 minutes and never come back.

I inspected the furnace and found it starts normally (frame, main blower, another motor on top of furnase...etc.) initial time but main blower stopped after 2 -3 minutes even though frame (fire) is on. Frame went out 1-2 minutes after main blower stopped. Frame is continuing to on and off but main blower never starts again except first time. First time means shut down the main switch, wait 5 minutes and bring it back on.

Main switch down---wait 5 minutes---main switch on---furnace starts normally (frame, main blower, motor on top of furnace)---main blower stopped in 2 minutes(fire is still on and top motor is running)---frame(fire) stopped(top motor still on)---frame(fire) turn on with top motor but no main blower---frame(fire) is continue to on and off and top motor is continue to run but main blower is continue to down.

What I did so far,

Cleaned air filter.

Cleaned main blower motor housing & inside of furnase.

Replaced capacitor (7.5 uf 370v)

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

hanadul

My main description was a little ugly.

Let me explain again.

Main blower on my furnace has stopped in 2-3 minutes and never come back.

Here’s steps

1) turn the thermostat up

2) inducer motor switches on, and comes up to speed

3) the pressure switch detects that the correct negative pressure has been reached and turns on the hot surface ignitor

4) the hot surface ignitor heats up and gets white hot

5) the main burner gas switches on and the burners light

6) after a delay the main fan switches on to circulate warm air around the house.

7) main fan stopped in 2 minutes even though main burner has a light and running

8) Main burner turned on and off repeatly but main fan never come back (I can hear some high pitch noise it is trying to run and I can see main fan moves a little bit (1 lap in 10 seconds))

What I did so far,

Cleaned air filter.

Cleaned main blower motor housing & inside of furnase.

Replaced capacitor (7.5 uf 370v)

Share this post


Link to post
Share on other sites
RegUS_PatOff

turn Motor Shaft by hand.

Does it turn easily, smoothly ?

Share this post


Link to post
Share on other sites
Budget Appliance Repair

Sounds like the motor is possibly tripping it's internal thermal overload device.

Check the voltage going to the blower motor when it turns off and the flame is still burning. If you still have 120 volts going to the blower motor and it isn't running then most likely the internal thermal overload has tripped or the bearings are seizing up once the motor warms up.

As RegUs says, turn the motor and see how it feels, it should turn very easily by hand and if you give it a spin it should keep spinning on it's own for at least 5 - 10 seconds depending on how hard you have spun it.

If it feels stiff when turned by hand you are going to have to replace the motor. You can try oiling the motor but at this point it is probably to far gone and will continue to give you problems.

Edited by Budget Appliance Repair
  • Like 1

Share this post


Link to post
Share on other sites
jumptrout

Attach your volt meter to the fan wires and read voltage while this happens. The fan relay may be bad and dropping power. Also,replace the motor capacitor.

I had a gas furnace do the same thing last week. A new capacitor corrected the problem.

  • Like 2

Share this post


Link to post
Share on other sites
Shootist

If you've replaced the capacitor and the blower still stops after a few minutes then it's probably a bad blower motor. Sometimes it could be the low speed fan relay on the board dropping out after a few minutes but this isn't common. Try running the furnace through a cycle with the thermostat switched to "fan on". If the blower still stops after a few minutes replace the blower motor.

Edited by Shootist
  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now