Lost with the new appliances? The Samurai teaches you Circuit Fu…

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
  • Announcements

    • Samurai Appliance Repair Man

      Webinar Recordings Index Page   11/07/2017

      On-demand appliance repair training videos for Professional Appliantologist members Over 30 hours (and growing!) of original, high quality appliance training webinars developed and given by yours truly are at your fingertips, on topics you won't find anywhere else. Fill in those knowledge gaps, strengthen those areas of uncertainty, and boost your skills. Watch on mobile or desktop at your convenience whenever, wherever.  Ultra Short Primer on Basic Electricity, Circuits, Ohm's Law, and Schematic Reading (Length: 1:04:48) Basic Refrigerator Troubleshooting (Length: 1:10:45) Schematic Reading Workshop, 10/2015 (Length 1:19:08) Troubleshooting Strategies for Computer-Controlled Appliances (Length: 48:34) Semiconductors and PN Junctions (Length: 1:04:37) Appliance Temperature Sensing Devices & Technology (Length: 1:27:33) Voltage Measurements, Meters, Ghost Voltages, and Triac-controlled Neutrals (Length: 1:29:32) Troubleshooting with Tech Sheets, Part 1, 4/2016 (Length: 1:09:26) Troubleshooting with Tech Sheets, Part 2, 4/2016 (Length: 1:21:11) Tech Sheet Review, 4/9/2016: Bosch Speed Cooker, Amana Refrigerator, GE Glass Cooktop Range (Length: 1:22:58) Pulse Width Modulated (PWM) Switches used in Samsung Switched Mode Power Supplies (SMPS) (Length: 27:07) PWM Computer Cooling Fan in a Whirlpool Refrigerator (Length: 14:53) Understanding AC Split-phase Household Power Supplies (Length: 52:41) Troubleshooting a Samsung Electric Dryer without Disassembly using Live Tests and the Schematic (Length: 22:47) Troubleshooting a Bosch Dishwasher No-Heat Problem using the Schematic and Live Tests (Length: 15:38) Linear Motors and Linear Compressors (Length: 55:54) Bi-directional PSC Drive Motor Systems in Whirlpool VM Washers (Length: 56:52) Appliance Service Call Structure and Troubleshooting Strategies (Length: 1:00:16) The Ten Step Troubleshooting Tango and Workshop Exercises (Length: 1:35:39) Troubleshooting Ten-Step Tango Advanced Workshop (Length: 1:32:06) Ten-Step Tango Troubleshooting Workshop: Refrigerators (Length: 1:35:57) Whirlpool Duet Washer Schematic Analysis & Whirlpool Dryer Moisture Sensor System (Length: 1:03:04) Neutral Vs. Ground, Inverter Microwave, Digital Communications, Loading Down in DC loads, and more! (Length: 1:14:45) Gas Oven Service Call After a Parts Changing Monkey (Length: 36:04) AFCI and GFCI Circuit Protection Technology (Length: 41:26) Troubleshooting Samsung Refrigerators and more (Length: 1:29:58) 3-way Valves and Dual Evaporator Refrigerators (Length: 1:15:45) Split-Phase Compressors and PTC Start Devices (Length: 1:11:57) Gas Dryer Ignition Systems (Length: 53:50) Refrigerator Sealed System Thermodynamics, Part 1 (Length: 43:07) Refrigerator Sealed System Thermodynamics, Part 2 (Length: 1:09:09) Refrigerator Sealed System Thermodynamics, Part 3 (Length: 1:11:56) Refrigerator Sealed System Thermodynamics, Part 4 (Length: 37:45) Refrigerator Sealed System Thermodynamics, Part 5 (Length: 16:35) To access these webinars and all the other info-goodies here at Appliantology, become a Professional Appliantologist today. If you need cost-effective, time-flexible, state-of-the-art appliance technical training, check out the Master Samurai Tech Academy.
    • Son of Samurai

      [Webinar] Appliantology Workshop   11/09/2017

      Information is the name of the game in the appliance repair trade today. Appliantology is a powerful information tool for the professional appliance repair technician. But just like with any of the more capable tools in your tool bag, many of the more powerful features are hidden from you unless you "read the manual." Ugh! Who wants to do that? Well, this is one time when you don't have to! In this webinar, Team Samurai will personally walk you through the site and show you many of the useful and powerful features that even long-time users probably never knew existed.   
joebudd

Converting a valve DSK-65-LP

Recommended Posts

joebudd

Hi

I would like to say hello to everyone. I have looked online and have contacted what is left of Dearborn. Everything seems to be top secret. My question is where can I get a parts manual for my wall heater?

I search and search and find nothing. I need help. Thanks

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

joebudd

Yes the heater is not made anymore and the company is gone. But there are people that are selling parts. The heater is a Dearborn. The reason I want a parts manual is to make sure everything is there and to cross reference parts.

Share this post


Link to post
Share on other sites
joebudd

I have been to Dearborn. No real info.

Share this post


Link to post
Share on other sites
joebudd

Ok forget the paper work. I had the burner out on the bench and unable to keep it burning. Took the valve apart and there was corrosion in it. I don't think there coil/solenoid works correctly either. So now I need a new valve. Now if someone can steer me in the corect direction. I will tell you what I need. Valve needs to have 1/2 in 1/2 out at 90 degrees, 24vac 1/2psi, needs a pilot, thermocouple, A knob with off/on/LO. Needs to be LP and at least 65000 BTU's. Can someone help come up with a part number so I can look at the specs. Thanks

Share this post


Link to post
Share on other sites
jumptrout

What are the model numbers on your valve?

Robertshaw probably has a cross.

  • Like 1

Share this post


Link to post
Share on other sites
RegUS_PatOff

Does it look like this ?

Robertshaw Natural Gas or L.P. Gas Valve:

OPTIONAL PARTS LISTED @ BOTTOM OF PAGE

Replaces Obsolete Gas Valve Part Numbers:

7000AERB5S7C 7000 AERB-5-S7C 7000AERB-5S7C 720-402 U745643 MG-055N 624583 624583B V8200F2520 720402 720DER, 7A7A18-001, 7A18001, 7A7A18-001, CARL37541; TF-5, P-1027, CAR4E400; CAR720402.

click on picture

4E287.jpg

  • Like 1

Share this post


Link to post
Share on other sites
joebudd

The valve is a essex alpha tafco TF-5. The picture of the valve looks like it might work depending on the in and the out. The pilot really needs to be on the input side, but I can make it work. The big thing is it needs a standing pilot and a manual hi and low heat setting. It is going in a wall furnace for the garage. "Little use". Size 4x4x3.

Share this post


Link to post
Share on other sites
joebudd

I found the original valve.

Share this post


Link to post
Share on other sites
joebudd

Ok minor problem. The valve I have states (set 10"). The valve I am looking at buying because it looks the same states

(set 3.5"). Is mine LP and the other natural gas? Now can I convert it easily? Thanks

Share this post


Link to post
Share on other sites
joebudd

I found a new old stock valve. Only problem mine is (set 10") and the new is (set 3.5"). Remember the Valve is old and parts are not available. Can I convert the valve? The springs in the my valve are corroded.

Share this post


Link to post
Share on other sites
jumptrout

No. The springs are what creates the pressure.

Gas valve rebuilding is not a hobby.

  • Like 1

Share this post


Link to post
Share on other sites
joebudd

It's not rocket science. I read use correct tools. Are there springs I can buy? Remember it is an older valve. Essex...post-66438-0-41224200-1325639892_thumb.j

Share this post


Link to post
Share on other sites
kdog

Topics merged

Share this post


Link to post
Share on other sites
applianceman18007260692

That big flat blade screw has a push pin under it. Remove the LP pin out of your old one and put it in that 3.5 valve if you have LP gas. If you have then nat gas then use it like it is.

  • Like 1

Share this post


Link to post
Share on other sites
joebudd

Ok just to make sure I understand everything correctly. On my valve I removed the screw and it appears to be a screw in orifice. I then removed the housing cover and a spring was under it. Now the orifice is corroded and might not be easily removed. If I remove it I will then have to set it for the (10"). I think I would be better off leaving the orifice in the cover and just transfer the cover. One other thing are the screw in orifices for that housing a common thing. How to setup??????

Share this post


Link to post
Share on other sites
applianceman18007260692

Show a pic of all sides of that valve.

The screw beneath the scew is probably the pilot adjustment screw.

Share this post


Link to post
Share on other sites
Shootist

Just be careful, joebudd. There are some things that should be left broken.

Share this post


Link to post
Share on other sites
joebudd

Here are the pics.

post-66438-0-80800800-1325812215_thumb.j

post-66438-0-35743800-1325812217_thumb.j

post-66438-0-87747700-1325812217_thumb.j

post-66438-0-63969900-1325812218_thumb.j

Share this post


Link to post
Share on other sites
joebudd

Here is one more

post-66438-0-56035500-1325812521_thumb.j

Share this post


Link to post
Share on other sites
RegUS_PatOff

picture of top of Valve ?

is this the "new" Valve ?

are there any part numbers on it ?

Share this post


Link to post
Share on other sites
applianceman18007260692

You cannot convert that valve based on what I see that thing is factory set and not servicable in the field...I may be wrong...been wrong before. I have a truck full of essex valves by the way.

Edited by applianceman18007260692
  • Like 1

Share this post


Link to post
Share on other sites
joebudd

I can't find the number on my valve. This number is fromm the "new" valve. 201-221001-1507

Both valves look identical. The only difference is mine states 10" on the bottom. Let me know if you have one. Post a picture.

Share this post


Link to post
Share on other sites
applianceman18007260692

show the top of the valve

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now