Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

KM Stove Temp Issue


atcherservice

Recommended Posts

atcherservice

I have a KM Stove M#665.75012101 with a irregular temp. The customer states that the temp set with the time option for say 350 will never get up there. When the customer selects bake only they get a PF reading. Several other service techs has abused this unit with no resolution. A gas valve and spark board was replaced. I checked resistance to the Temp sensor and (with the oven already running for several hours by the cust) the reading was 1300 ohms. I check i the ERC board and that seems fine. I got a voltage reading to and from both boards and a DV voltage reading from the J1 side of the spark board. With dam near everything replaced by other service techs. The only thing left is the ERC and Temp Sensor, any ideas?????????:yikes::yikes::yikes:

Link to comment
Share on other sites

  • Replies 5
  • Created
  • Last Reply
  • Team Samurai

My first suspicion in gas ranges with complaints of insufficient temperature is the ignitor. What can happen is that the ignitor is slow to ignite, but eventually does, and the oven may initially get up to temp and satisfy the thermostat. But when it cools down and the thermostat calls for heat, the burner is slow to fire resulting in low temp in the oven cavity.

Of course, this is easy to test for by measuring the current draw through the ignitor and by monitoring the burner during a heat cycle with the oven set at 350F.

If the burner is firing correctly and the current draw is within specifications, then replace both the ERC and the sensor as a set.

Link to comment
Share on other sites

atcherservice

This is a direct spark igniter would I still be able to check resistance and current draw off that igniter? I assumed that if the burner was ignited that that igniter was ok.:?

Link to comment
Share on other sites

  • Team Samurai

Sorry, I overlooked the critical distinction that this is DSI range. That invalidates most of what I said previously. Oh well, shit happens. :grunt:

Whirlpool (the range manufacturer, in case you didn't already know that) has a tech memo out on this, I'll find it and post it here.

Link to comment
Share on other sites

  • Team Samurai

That's the one! Mucho domos, Pegi! :dude:

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...