Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

790.75503207 Missing tech sheet.


telefunkenu47

Recommended Posts

Is there anything you might have on this? mod no 790.75503207. wont bake, element ok. power from bk1. Other leg missing.Cant figger it out w/o roadmap. Help

Link to comment
Share on other sites

power from bk1. Other leg missing.

Ckeck voltage across DLB in control, might find your "other leg" there.

Click on Pic:

Oven-Control-Board-318010102-01168964.jpg

  • Like 1
Link to comment
Share on other sites

not sure which is which. nothing clearly marked as such. there are 2 relays on the back. 1 yellow wire from the element splits to black. Need a diagram.

Link to comment
Share on other sites

L1 on controller (usually black) closes to BR or BA for line 1 - Red wire should close between com and n.o. - if 240 volts are seen across com - no while bake or broil is on, replace control

  • Like 1
Link to comment
Share on other sites

Kenmore 790.75503207 made by Frigidaire

318045330.pdf

link PM'd

  • Like 1
Link to comment
Share on other sites

  • 4 years later...
×
×
  • Create New...