Learn how to troubleshoot like a Master Samurai Tech...

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
Sign in to follow this  
Followers 0
northcaver

reapair/diagnostic manual needed Bosch

6 posts in this topic

Please send me a repair /dignostic manual for Bosch washer WFMC 530CUC/10

need to diagnose why it isnt spinning (not off balance)

Thank you!

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

Thanks for the links kdog, but I am having a problem using the diagnostic test on my washer model..WFMC 530cuc/10...are there any other manuals available that would have the diagnostic routine for this model?

Share this post


Link to post
Share on other sites

Sorry kdog, forget my last post...i'm figuring this out ;-)

Share this post


Link to post
Share on other sites

Groan...I thought I had it figured out..not. I follow the diagnostic prescribed routine to pull the error codes off of the machine, and I cant get the bugger to do it...it just stays lit as if I am going to start a load of clothes. what am I doing wrong? Anyone????

Share this post


Link to post
Share on other sites

WFMC53

Entering & using WFMC32/33/43/53 test programs:

•To reset, rotate cycle selector knob to OFF position.

•To enter test program, push and hold SPIN SELECTION and DELAY START buttons at the same time,

then rotate cycle selector knob CCW to PERMANENT PRESS COLD position.

Continue holding SPIN SELECTION and DELAY START buttons until P:01 shows in display.

•To select tests, push SPIN SELECTION button (to scroll through tests) until desired test shows in display (P:01 - P:17)

START/PAUSE light will flash.

•To start tests, push START/PAUSE button while its light is flashing -- light stays lit when test has started.

To end tests, push SPIN SELECTION button.

•To exit test program, rotate cycle selector knob to OFF position.

Share this post


Link to post
Share on other sites
Sign in to follow this  
Followers 0