Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

WP Gold refrigerator


fixit guy

Recommended Posts

I have a WP Gold model# GS5SHAXSL00. The freezer is -20 and that is causing defrost drain and return air duct to freeze. I have changed main control and thremistor but still nada. It''s been a long time since I visited this site and it is good to see that the same group of techs are still here helping poeple. Thanks in advance......

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • RegUS_PatOff

    2

  • fixit guy

    2

Top Posters In This Topic

... I have changed main control and thremistor

that's all there is ...

Did you do the Thermistor test as mentioned on the tech sheets ?

Link to comment
Share on other sites

Thanks for the reply.j Yes I did the thermistor test before changing the control board. When I changed the thermistor and board, the control did a self test upon startup and thermistor passed. The damper was open when I left the house and now I am thinking damper problem?

Link to comment
Share on other sites

it looks like the Thermistor monitors the Fridge temperature (to control the Compressor)

If the Fridge is staying too warm (Light not turning OFF) then the Compressor will stay ON

The Damper doesn't look like it's electrically operated.

click on picture

Damper-Control-Assembly-W10151374-00704083.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...