Learn how to be your own tech line…

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
simanco

Kenmore Oven Cycling Temps

2 posts in this topic

Hello all,

We have a Kenmore double oven range (made by Frigidaire) that has an oven temperature problem. You can set the thing to 350 and get temps from 300 to 400 (I've seen it go higher).

Is it safe to assume this is a thermostat problem? If not, what are the other culprits?

If it is a thermostat problem, I've checked around online and the OEM part nor any of it's substitutions are available. Should I have any problems installing a Universal replacement?

Model: 628.9468213

sn: 6A 80420

The Kenmore part number for the Thermostat is: 1325331

On the thermostat itself is: QE216045

Thanks,

Jim

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

How are you measuring your oven temp?

Oven Temperature Calibration Method (from Whirlpool):

If a consumer complaints about poor baking performances, the first steps to take would be to

make sure the oven temps are calibrated correctly; follow the four coming steps to properly

calibrate the oven:

1. Insert the bulb or (thermocouple) from your thermometer making sure to clip it to the oven

temperature sensor for best result.

2. Turn on the oven and set to 300*F, when you first turn on the oven it will do a 6 minute

pre-heat, once the pre-heat is completed the oven should be at around 260*F. The oven

will continue to heat until the set temperature is reached.

3. Once the set temp is reached the control will shutt off the heating element, after the

heating element shuts off the oven temp will continue to rise for a bit longer. At this time

you need to record the highest temperature in the oven (for this we will use 315*F), once

the oven temps reaches it max it will start to climb down. It will continue to climb down to

more or less 285*F, you need to record this temp as well.

4. At this time you should have two sets of temps (315*F and 285*F), you need to let the

oven cycle 2 more times and record all of the temps to which you should have 6 different

numbers at the end of all cycles.

For example

Off……315*F

On……285*F

Off……310*F

On……295*F

Off……310*F

On……295*F

After obtaining all of the cycled temps you need to add them all up and dived them by 6.

Share this post


Link to post
Share on other sites