Troubleshoot modern appliances with confidence…

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
  • Announcements

    • Samurai Appliance Repair Man

      Webinar Recordings Index Page   07/27/2017

      One of the benefits of your Professional Appliantologist membership is that you can attend the regular, live training webinars and you have access to the recordings as well. So if you can't make it to the live webinar, catch the recording at your convenience. The webinar recordings are conveniently listed for you on the Webinar Recordings Index Page.   
AmTec Services

GE reffer problems

Recommended Posts

AmTec Services   
AmTec Services

Hey all;

I've got 3 units that I need some help with.

1st is a GE sxs that had a huge frost build up in freezer and no cool. Jumpered defrost at motherboard and had 5 amp reading showing defrost circuit is good. Replaced m board.

2nd is GE sxs with thawing ice bucket and complaints of warm reffer section. Tested defrost and found it ok. Replaced defrost term. switch

3rd is GE sxs with complint of warm reffer section ( wave of heat when door opened is compliant). Thinking defrost on to long, replaced defrost term. switch.

Still have problems with all three.

The two defrost switches I replaced are 140/30 rated. Tested them tonight and found them opening and closing as designerd.

I thought the switches controlled the defrost time, but at 140 degress, this seems to high.

I need an explanation of the proper opertion of the GE mother board.

These all have board # WR55X10942

Eating crow and waiting for a reply!!!!

............................Amtec

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

NCARepair   
NCARepair

#2 bad evap fan and/or motherboard or evap thermister. #3 probably a broken light switch keeping interior light on. Have customer remove bulbs to check. Did you defrost #1 when changing the board? Have you seen it iced again?

  • Like 1

Share this post


Link to post
Share on other sites
RegUS_PatOff   
RegUS_PatOff

also, depending on model and serial numbers,

a bad Evaporator Fan can blow the MB,

also, the MotherBoard and Evap Fan may be covered under a service bulletin

Share this post


Link to post
Share on other sites
AmTec Services   
AmTec Services

Went back to #1 and found it frosted again. Jumpered MB and found defrost circuit good.Defrosted unit and told customer I'll need to replace sensors. Is there a test for the sensors? How does the MB decide when to defrost. Is there way to make the MB go into defrost mode?

Evap fan is good on this unit.

Going to check #3 this afternoon. I'll post after.

.................Thanks guys!!

Share this post


Link to post
Share on other sites
Samurai Appliance Repair Man   
Samurai Appliance Repair Man

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now