Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

GE REFRIGERATOR GSH25JSXBSS


jambatt

Recommended Posts

Installed new icemaker. Water valve does not stay open long enough to fill up tray. Can water cycle be adjusted like on the Whirlpool model icemakers???

Link to comment
Share on other sites

  • Replies 4
  • Created
  • Last Reply

Top Posters In This Topic

  • jambatt

    3

  • RegUS_PatOff

    2

Installed new icemaker.

this one ?

with the ON / OFF Slide Switch ?

click on picture

Ice-Maker-Assembly-WR30X10093-00703862.jpg

ICE MAKER - ICE BALL Bulletins.pdf

link PM'd

Link to comment
Share on other sites

That's the one. Reduced water flow at door dispensor also. This unit has had water filter issues in the past. Gonna install new filter and see what happens.

Link to comment
Share on other sites

may be clogged Screens on the Water inlet Valves ..

and / or clogged "saddle clamp" Valve.

If so, then if ever replaced, may then have too much water for the IceMakler, etc ..

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...