Learn how to troubleshoot using schematics like a real tech…

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
  • Announcements

    • Samurai Appliance Repair Man

      [Webinar] Basic Refrigeration Sealed System Thermodynamics   09/21/2017

      See this calendar event for details:                   
    • Samurai Appliance Repair Man

      Webinar Recordings Index Page   09/21/2017

      One of the benefits of your Professional Appliantologist membership is that you can attend the regular, live training webinars and you have access to the recordings as well. So if you can't make it to the live webinar, catch the recording at your convenience. The webinar recordings are conveniently listed for you on the Webinar Recordings Index Page.   
Sign in to follow this  
jambatt

Kitchenaid Oven/Microwave Combo KEHC309JSS4

Recommended Posts

jambatt   
jambatt

Owner says unit shuts off and shows Red F2 and Green E1 fault code. Hit Clear/Cancel and unit will come back to life. Also said unit will show Set Temp Probe when humidity is high even though probe is not connected. Service manual says F2 and E1 are problems with touch pad. Is this problem a result of the touchpad issues or is this a control board problem? Either way this is a damn expensive fix.

Edited by jambatt

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

jambatt   
jambatt

Anybody out there had any experience with one of these???

Share this post


Link to post
Share on other sites
jambatt   
jambatt

Still got this one on my list. Any suggestions would be appreciated!

Share this post


Link to post
Share on other sites
RegUS_PatOff   
RegUS_PatOff

F2 E1 Keypad not connected

1. Check keypad connector for firm connection.

2. Press CANCEL. If error code returns after 60 sec., replace keypad

(may be dirty / corroded ribbon cable connections)

Probe:

disconnect P5 at Controller Board and measure high resistance (leakage) between (at the) Probe connections

or the cable P5.4 to P5.5

If bad cable, and Probe never used, just disconnect those two wires at the Controller.

any parts ordered from RepairClinic can be returned for a refund (less shipping)

including installed electrical parts

Membrane Switch, Stainless Steel

click on picture $ 258

picUnavailable175.jpg

click on picture

Oven-Control-Board-4452953-00701060.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this