Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

service manual for GE monogram Oven zdp36n6d2ss


DurhamAppliance

Recommended Posts

Customer having problem with locking mechanism. Probably need to replace locking mechanism. Manual would be helpful.

Thanks!

Link to comment
Share on other sites

  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

  • DurhamAppliance

    4

  • RegUS_PatOff

    3

Top Posters In This Topic


... Probably need to replace locking mechanism.

click on picture $ 322 :woot:
picUnavailable175.jpg
check the Switches

the only GE service ZDP36 manual I have is for ZDP36_ _ _H
(different Latch assembly)
Link to comment
Share on other sites

Yeah the price for that thing is outrageous! Wanted to check for any diagnostic codes. Customer thinks lock needs to be replaced so that he can....wait for it......use Self Clean! This is despite my warning.....the price of the lock may do more than any apocalyptic speech I can give, Thanks for the info!

Link to comment
Share on other sites

...use Self Clean! This is despite my warning.....

that may have been the cause of the Failure ...

Link to comment
Share on other sites

that may have been the cause of the Failure ...

He admitted as much to me when I was repairing his fridge a few months back.

Link to comment
Share on other sites

the only GE service ZDP36 manual I have is for ZDP36_ _ _H

(different Latch assembly)

send me that one....it may be helpful.

thanks!

Link to comment
Share on other sites


×
×
  • Create New...