The days of Monkey Boy Service Calls are over...

Click here to check out our fun short course and learn how to get the most out of Appliantology.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
  • Announcements

    • Samurai Appliance Repair Man

      [Webinar] Basic Refrigeration Sealed System Thermodynamics   09/21/2017

      See this calendar event for details:                   
    • Samurai Appliance Repair Man

      Webinar Recordings Index Page   09/21/2017

      One of the benefits of your Professional Appliantologist membership is that you can attend the regular, live training webinars and you have access to the recordings as well. So if you can't make it to the live webinar, catch the recording at your convenience. The webinar recordings are conveniently listed for you on the Webinar Recordings Index Page.   
salvagemonger

Furnace and A/C removal

Recommended Posts

salvagemonger   
salvagemonger

My friend is replacing his furnace and a/c with a new one. He wants me to have the old one, but he said I would need to hire a license tech to remove it from his house and evacuate the system. I thought evacuating the system's freon is unecessary since I'm reusing the A/C and not taking it to the dump. I thought it would benefit me to keep the freon within it.

Could someone please comment. Is it necessary to evacuate the freon from the system even though the A/C it's going to be reused.

Thanks,

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

applianceman18007260692   
applianceman18007260692

A split system needs to be evacuated of gas before moving. Take the copper and everything because his new system gonna need differing size of copper anyway.

Share this post


Link to post
Share on other sites
RegUS_PatOff   
RegUS_PatOff

The Compressor and Condenser Coils are outside of the house...

The Evaporator Coils are inside the house, inside the Furnace Air Handler

How are you going to take either or both without disconnecting them ?

Share this post


Link to post
Share on other sites
tommytech   
tommytech

most of the refrigerant can be "captured" inside compressor. are you sure its worth the expense to move to your home? the system is being replaced for a reason.

Share this post


Link to post
Share on other sites
jumptrout   
jumptrout

Install your refrigerant gauges on the condenser.

Start the system in COOL.

Once the suction pressure starts pulling down,CLOSE the high side valve.

When the low side gets to "0" psi quickly close the suction valve and DISCONNECT power.

Cut your copper refrigerant lines near the condenser and seal the cut lines with tape.

Same for the inside lines at the air handler.

When the unit has been re-installed add a filter drier to the high side tubing, pull a good vacuum on the lines and the A/H..

If no leaks are present,open the high side valve to release the captured refrigerant.

Then open the low side valve.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now