Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Microwave just died...Sunbeam model SGB8901


laxdef69

Recommended Posts

So my daughter states last night that when she closed the door on her microwave two days ago, it just went off. Nothing works, no lights, no front panel LCD display, nothing. There are no blown breakers or fuses in their fuse box.

They tested the outlet and that works fine, and they plugged the microwave into another outlet and it still didn't work.

is there a fusible link or on unit fuse that could have blown?

Thanks all...just throwing the on the forums before advising them to throw the microwave away...

model SGB8901

Serial Tab 81106215449

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • laxdef69

    2

  • RegUS_PatOff

    1

  • Cactus Bob

    1

Popular Days

Top Posters In This Topic

there is a fuse , it is inside

remove the top and follow the power cord it might be on a small PC board near the back or on a little fuse block . the fuse is about an inch long and is white with silver end caps that make the connection on each end . fuse is 15 amps

remove and test , most likely it is bad

fuse may blow if the micro switches get out of sync and one hangs up , most of the time you change the blown fuse and it never happens again

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...