Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Coin calibration on sc35md2yu40001


jkilgore34

Recommended Posts

A laundromat owner wants to charge more money per load on this commercial frontload. Can someone tell me how to do it? Model #sc35md2yu40001.

Link to comment
Share on other sites

  • 5 months later...
  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • jahjahbinks

    1

  • RegUS_PatOff

    1

  • jkilgore34

    1

  • SpaceCoastBruce

    1

machine operations and money collections are 2 different things speed queen will make the machine with the acccess to make it coin/card accessable different co`s make the money readers and collectors -etc 

Link to comment
Share on other sites

  • 6 months later...

Any luck with this ?

 

I've been approached by a laundromat owner to service his stuff so I'm going to look at it.

 

It would be nice to exchange info with some one about the commercial world.

 

Bruce

 in Fla

Link to comment
Share on other sites

http://appliantology.org/files/file/1332-alliance-laundry-washer-service-parts-coin-programming-hc-sc-uc/

Alliance Laundry Washer Service Parts Coin Programming HC SC UC

Alliance Laundry Washer

Speed Queen
Huebsch

HC
SC
UC

F238000 Service
F232173 Parts
F232133 Coin Programming

after upload approval by the Samurai
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...