Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

GE Dryer DRSR495EG1WW

jambatt

By jambatt
in DIY Appliance Repair Help

 Share

Recommended Posts

jambatt Sensei

jambatt

Posted
Posted

Customer says unit shuts down completely after about five minutes of run time and top of cabinet is very hot. Will not restart until it cools down. I've spent many hours monitoring this beast and I can't get it to duplicate the problem. Just got a call back less than an hour after watching it complete  drying a load with no problem. Timer was replaced about 16 months ago. Cycling thermostat working OK. Motor thermal overload  OK. Exhaust vent clear. Running on  timed dry cycle should bypass the circuit board for the auto dry sensor. Could a intermittent faulty high limit thermostat cause total shutdown?? This one has been  a head and butt scratcher.

Link to comment
Share on other sites
  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • Samurai Appliance Repair Man

    2

  • jambatt

    2

Popular Days

Top Posters In This Topic

Popular Days

  • Team Samurai
Samurai Appliance Repair Man Sensei

Samurai Appliance Repair Man

Posted
  • Team Samurai
Posted

You need to duplicate the exact conditions the customer creates when using the machine:  same load of clothes, same settings on the dryer, etc.  This kind only comes out by prayer and fasting.  

Link to comment
Share on other sites
  • Team Samurai
Samurai Appliance Repair Man Sensei

Samurai Appliance Repair Man

Posted
  • Team Samurai
Posted

his kind only comes out by prayer and fasting.  

 

 

Done that 

 

You mean the prayer fasting didn't work for you?  That always works for me.  

 

Have you checked the heating element to see if one of them is grounded?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing
×
×
  • Create New...