Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

ASKO W660 (WM55) washer service manual reqeust


pinesprings

Recommended Posts

pinesprings

My ASKO W660 washer was working fine and suddenly on the next load when Marianne pushed the start button, nothing happened.  The red pilot light was on and she was going to use the program that had been previously selected, so she pressed nothing in starting this load other than "start" which did not work.  We tried shutting it down, unplugging it, and no functions, menus, etc operate, except the "on" button and light as well as the door open button.  I would like to get a service manual and see what it might say the problem is.  I suspect something like a door latch switch or something that is not making a complete circuit and holding the functions off.  I checked both fuses and they both have continuity.

Please help,

John and Marianne

Link to comment
Share on other sites

  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

  • pinesprings

    1

  • pjv83

    1

Popular Days

Top Posters In This Topic


×
×
  • Create New...