Learn how to troubleshoot like a Master Samurai Tech...

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
Sign in to follow this  
Followers 0
philcheck

GE GSS201EPA SERVICE MANUAL NEEDED

6 posts in this topic

REF AIR DAMPER PROBLEMS==REF WARM FREZ OK PC,DAMPER AND THERMISTERS REPLACED..NO FROST BUILD UP ,GOOD FAN

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

LF2     YOU MEAN I HAVE TO READ THE INSTRUCTIONS?   :woot:

Share this post


Link to post
Share on other sites

LF2  

:whistling:

Share this post


Link to post
Share on other sites

THATS GOT TO BE IT....THE WORDING ON THE SHEET LEADS YOU TO BELIEVE THAT IT APPLIES ONLY TO "ALL BOTTOM FREEZER MODELS..WITH ENCODER MODELS WITH THE FOLLOWING SERIAL NUMBERS  ETC ETC ETC"  WHEN IN FACT ITS "ALL BOTTOM FREEZER MODELS  AND ALL OTHER ENCODERS MODELS WITH THE FOLLOWING SERIAL NUMBER"    UGH...DRIVES ME CRAZY!!! :woot:  :wacko:  :pint1:

Share this post


Link to post
Share on other sites

There's only one instance which there needs to wires cut.

If the refrigerator main board is mounted vertically (as shown below), AND there are wires in both

pin 1 and pin 2 of J1, Cut the wire in J1 pin 2.

Note: When cutting the wire, leave enough wire to reconnect if necessary!

Taken from this pointer.

https://www.dropbox.com/s/m7s72q1o46d47ix/Main%20Board%20Replacement%20Pin2%20cutting%20jumper%20wire%20clipped%20Gss22%20gss25%20hss22%20hss25.pdf

Edited by Spannerwrench

Share this post


Link to post
Share on other sites
Sign in to follow this  
Followers 0