Need appliance parts? Call 877-803-7957 now or use the parts search box:

Parts Search

Troubleshoot modern appliances with confidence…

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
Sign in to follow this  
Followers 0
elmonducky

Whirlpool F.L. Washer WFC7500VW0

4 posts in this topic

No spin, has an F2 error code.

Share this post


Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

Whirlpool Washer
WFC7500VW0

Repair Part List - W10112250
Tech Sheet - 46197042905

http://appliantology.org/files/file/1133-whirlpool-washer-wfc7500vw0/

 

F02

OVERFLOW CONDITION
Overflow level has been reached, and last for more than 2 seconds.

In an overflow condition, the door remains locked and the drain pump runs constantly, and after 10 minutes,

door will be unlocked in order to cut off the valves power.

Then if overflow still happens, start pump again.

Turn off hot and cold water faucets and unplug the unit before servicing.
Possible Causes/Procedure
1. Check the drain hose and make sure it is not plugged or kinked.
2. Unplug washer or disconnect power, if water still flows into the washer, replace the water valve.
3. Check wire harness connections to the drain pump, pressure switch, water inlet value, and Central Control Unit (CCU).
4. Check/clean drain pump filter of foreign objects.
5. Check for drain pump failure.
6. Check the inlet valve for proper shut off.
7. Check the pressure switch for proper operation.
8. Remove hose from pressure switch. Dislodge any debris build up in the hose inside the outer tub.

Debris in side the hose will not allow the switch to sense a pressure change.

Share this post


Link to post
Share on other sites

Interesting there is NO  water in the tub whatsoever! 

Share this post


Link to post
Share on other sites

things to check
 

7. Check the pressure switch for proper operation.
8. Remove hose from pressure switch. Dislodge any debris build up in the hose inside the outer tub.

Debris in side the hose will not allow the switch to sense a pressure change.

Share this post


Link to post
Share on other sites
Sign in to follow this  
Followers 0