Begin your journey to appliance repair mastery…

Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Podcast | Contact

Stay connected with us...

Samurai on Facebook - become a fan today! Sign up for our free newsletter and keep up with all things Appliantology. Subscribe to our YouTube channel for lots of appliance repair tips and help! Follow the Samurai on Twitter and get timely morsels of Appliantological Wisdom! Subscribe to our MST Radio podcast to learn secrets of the trade.
  • Announcements

    • Samurai Appliance Repair Man

      Webinar Recordings Index Page   11/07/2017

      On-demand appliance repair training videos for Professional Appliantologist members Over 30 hours (and growing!) of original, high quality appliance training webinars developed and given by yours truly are at your fingertips, on topics you won't find anywhere else. Fill in those knowledge gaps, strengthen those areas of uncertainty, and boost your skills. Watch on mobile or desktop at your convenience whenever, wherever.  Ultra Short Primer on Basic Electricity, Circuits, Ohm's Law, and Schematic Reading (Length: 1:04:48) Basic Refrigerator Troubleshooting (Length: 1:10:45) Schematic Reading Workshop, 10/2015 (Length 1:19:08) Troubleshooting Strategies for Computer-Controlled Appliances (Length: 48:34) Semiconductors and PN Junctions (Length: 1:04:37) Appliance Temperature Sensing Devices & Technology (Length: 1:27:33) Voltage Measurements, Meters, Ghost Voltages, and Triac-controlled Neutrals (Length: 1:29:32) Troubleshooting with Tech Sheets, Part 1, 4/2016 (Length: 1:09:26) Troubleshooting with Tech Sheets, Part 2, 4/2016 (Length: 1:21:11) Tech Sheet Review, 4/9/2016: Bosch Speed Cooker, Amana Refrigerator, GE Glass Cooktop Range (Length: 1:22:58) Pulse Width Modulated (PWM) Switches used in Samsung Switched Mode Power Supplies (SMPS) (Length: 27:07) PWM Computer Cooling Fan in a Whirlpool Refrigerator (Length: 14:53) Understanding AC Split-phase Household Power Supplies (Length: 52:41) Troubleshooting a Samsung Electric Dryer without Disassembly using Live Tests and the Schematic (Length: 22:47) Troubleshooting a Bosch Dishwasher No-Heat Problem using the Schematic and Live Tests (Length: 15:38) Linear Motors and Linear Compressors (Length: 55:54) Bi-directional PSC Drive Motor Systems in Whirlpool VM Washers (Length: 56:52) Appliance Service Call Structure and Troubleshooting Strategies (Length: 1:00:16) The Ten Step Troubleshooting Tango and Workshop Exercises (Length: 1:35:39) Troubleshooting Ten-Step Tango Advanced Workshop (Length: 1:32:06) Ten-Step Tango Troubleshooting Workshop: Refrigerators (Length: 1:35:57) Whirlpool Duet Washer Schematic Analysis & Whirlpool Dryer Moisture Sensor System (Length: 1:03:04) Neutral Vs. Ground, Inverter Microwave, Digital Communications, Loading Down in DC loads, and more! (Length: 1:14:45) Gas Oven Service Call After a Parts Changing Monkey (Length: 36:04) AFCI and GFCI Circuit Protection Technology (Length: 41:26) Troubleshooting Samsung Refrigerators and more (Length: 1:29:58) 3-way Valves and Dual Evaporator Refrigerators (Length: 1:15:45) Split-Phase Compressors and PTC Start Devices (Length: 1:11:57) Gas Dryer Ignition Systems (Length: 53:50) Refrigerator Sealed System Thermodynamics, Part 1 (Length: 43:07) Refrigerator Sealed System Thermodynamics, Part 2 (Length: 1:09:09) Refrigerator Sealed System Thermodynamics, Part 3 (Length: 1:11:56) Refrigerator Sealed System Thermodynamics, Part 4 (Length: 37:45) Refrigerator Sealed System Thermodynamics, Part 5 (Length: 16:35) To access these webinars and all the other info-goodies here at Appliantology, become a Professional Appliantologist today. If you need cost-effective, time-flexible, state-of-the-art appliance technical training, check out the Master Samurai Tech Academy.
    • Son of Samurai

      INCREDIBLE DEAL: Introducing the Master Samurai Tech Alumni Program   01/17/2018

      Certified graduates of our Fundamentals course over at Master Samurai Tech can now apply for membership at Appliantology 100% FREE! They'll have all of the benefits available to Professional Appliantologist members at none of the cost. How do you get in on this steal of a deal? Read the post below to find out!  

Utica boiler with Beckett AFG Series burner

Recommended Posts


Utica boiler model # SFH 33100WTL with Beckett AFG Series oil burner model # 02117-90519 and Beckett Interrupted Ignition Oil Primary Control model # R7184B1032. Green flashing light indicates lockout condiition, however; control will not reset when reset button is pushed. Is it a bad control or an ongoing condition that must be addressed before control will reset?  Power to the control but no power to the burner motor. 


Share this post

Link to post
Share on other sites

Need appliance parts? Call 877-803-7957 now!

Cactus Bob

You should never just reset an oil burner , there was a reason the reset tripped in the first place

most likely your nozzle is plugged with a little dirt , or your transformer is not producing enough spark to light the oil

regardless of the reason , pressing the reset button (if it worked) may just pump another 45 seconds of oil into the chamber


I worked at a church 30 years ago in my new jersey days , the oil boiler was out , i asked the pastor the number of times he has hit the stack control(reset) , he said once , with that i pushed the button and flames came out of everywhere , up the flue out the front man what a jaw dropping mess

with that he said , i only pressed it once , but my wife might have been pressing it too


an oil burner is nothing to mess with if your unsure of what your doing

Edited by Cactus Bob

Share this post

Link to post
Share on other sites

A few thoughts... first, clean the HX. All of it. Get a good brush, and a good vacuum. Make sure the thing is as clean as possible and that you got most of the gunk out. Then go down the check list. 


An easy annual item is the nozzle - always replace and chuck, do not attempt to clean, drill, etc. 


Electrodes can be adjusted to perfection with precision-ground go / no-go gauges. 


The turbulator needs to be clean, devoid of soot, etc.


The external air supply shutter should be clog-free, adjusted per mfgr specs for the particular nozzle/model of burner. Ditto on the internal baffle, if there is one (Viessmann Vitoflames have 2, IIRC).


You should be using a tiger loop. It prevents condensation and water accumulation in oil tank by eliminating oil return line leading to warming and cooling inside heating oil tank. 


Are the filter(s) clean? Don't use cheap filters, rather go for a quality filter that has a vacuum gauge built-in that shows whether the oil pump is straining to get oil into the burner - a sure sign of a clogged filter. I used to use Garber. Seemed to work as intended (kept water out of pump). 


Ensure there is no water in the oil tank. If there is, find an opportunity to drain it out per federal/ state / local requirements. Water in the tank leads to bacterial growth, tank degradation (if you have an old-fashioned steel tank), etc. Water issues usually rear their heads when people run low on fuel or after fills when the tank is roiling. A floating pickup can help here.


Check the flue pipes and chimney for obstructions, clean as necessary. Double check draft damper for proper operation / installation. Ever find a racoon in a flue? An acquaintance did. Thank goodness the boiler refused to fire. 


I'm sure there's more. Only after going through the whole check list listed in the service manual should you attempt to re-light. If you haven't taken the service course, do. It'll save you a lot of headaches.


After successful re-light ensure you have zero smoke (you are using a smoke meter right?) followed by using an electronic combustion analyzer to dial the air shutter(s) and / or oil pressure into perfection. 


See OilTechTalk and the Firedragon forums for more specific advice re: tuning oil systems. Last I heard, both owners tour the country giving tuning / service seminars. 


If you're not a pro, have a pro with the right equipment (i.e. smoke meter, electronic combustion analyzer, etc.) do it for you. Annually! Even though I am a certified service tech for the boiler I used to service in my home I still hired a pro annually to re-check it, etc. 


Ever since I switched our house to gas heat, I have been looking forward to taking that service course too. Not enough time! But even if I were certified to service it, I'd still have a pro look at the thing annually. 

Edited by CvW

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now