Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      3  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore 110.28902790 wiring diagram or ?


pathfinder1941

Recommended Posts

Thought I had isolated no agitator start to open timer node/nodes but new timer was no help.  Need schematic or advice if you have seen this phenom.  Machine fills but motor never activates for agitation.  Timer eventually advances to drain (pump out) but never agitation.

Link to comment
Share on other sites

  • 2 weeks later...

GMF - Thanks for the prompt reply, would that I had checked back right away.  The motor is not activated in agitate, runs fine in spin.   I am going to look at unit again this AM.  Speed switch seems to be critical to the 120vac to motor.   I'll see if I can decifer the schematic on back dash enough to jumper same.

Link to comment
Share on other sites

×
×
  • Create New...