Jump to content
LIMITED TIME OFFER: Use code 10YEARS10 to get 10% off your Appliantology membership. Click here for more ×
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Recommended Posts

I am asking for a repair manual for a whirlpool dryer mod. # wed9200sq1. It keeps blowing high limit thermostats intermittently. Do you have any nifty ideas why? I mean besides a short some where that we can not find.

Link to comment
Share on other sites

  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

  • RegUS_PatOff

    1

  • abbinoxious

    1

Popular Days

Top Posters In This Topic

could be a Heating Element partially shorted to chassis / ground

could be a Venting problem

 

What are the Vent temperatures ?

With an empty load, Timed Dry, High Heat, the vent temperature should cycle somewhere between 135F and 160F

Check the Vent air temperature at the back of the Dryer using a probe-type thermometer.

If you have a Harbor Freight Store near you,
click on picture $ 2.99 sometimes on sale
image_1255.jpg

Dryer Vent:
Vent should be rigid metal.
Short lengths of flexible metal may be OK, if not crimped when moving the Dryer into place.
NO plastic
NO PVC
NO screws
Foil Duct Tape is OK.

Check / clean the Dryer Vent

Disconnect the Dryer Vent and check for good air-flow there and where it exits the house.

 

Whirlpool Dryer
WED9200SQ1

Repair Part List - W10194580
Tech Sheet - W10198666


was:

Tech Sheet - W10177459A
Tech Sheet - W10177459

 

available after upload approval by the Samurai

 

Link to comment
Share on other sites


×
×
  • Create New...