Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

GE CO OK TOP "PP989DNBB"


applianceman1

Recommended Posts

This is a GE Profile Downdraft Cooktop.

I'm looking for the tech sheet or service manual

for this cooktop.

Thanks

Link to comment
Share on other sites

  • Team Samurai

Walter, that model number is incomplete-- there should be a number after the "N." 

Link to comment
Share on other sites

I'll have to check with the customer.

He said the right front burner was

only heating in the middle.

It's a glass top with down draft.

If I can't get the number are they all

disassembled the same.

Thanks

Link to comment
Share on other sites

All the GE glasstops I've worked on have about a dozen Torx screws around the perimeter that allow you to take the glass off. The tech sheet should be inside. Two main possibilities are the burner itself, in which case the burn will be obvious and the infinite control. Pretty straight forward, either way.

  • Like 1
Link to comment
Share on other sites

Thanks for the information.

I tried to get the tech sheet in the

downloads but there isn't one.

Like you said pretty straight forward.

Link to comment
Share on other sites

  • 2 weeks later...
×
×
  • Create New...