Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Need a service manual for a Maytag Commercial washer MFS35PDFTS


Mr.Dan

Recommended Posts

Local Fire Dept bought this used and has asked me to service it.  Never worked on one before and want see a manual so I don't waste too much time trying to trouble shoot.  Unit shuts down mid-cyle, just goes dead lights out.  Thinking door lock or wire connector, but if they kill power and restart it comes back to life.  TYA

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • Mr.Dan

    2

  • Adirondack Bob

    1

  • applianceman97

    1

It is possible that the model number is not as listed, I am going by what was sent to me.  I have not been on site.  I don't normally work on commercial units, but my brother-in-law is the Fire Chief so its kinda hard to pass on.

Link to comment
Share on other sites

All service manual request must be in the appliance service manual requests forum.

Moved topic to service manual requests.

Link to comment
Share on other sites

×
×
  • Create New...