Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.

  • Upcoming Events

    • Appliantology Live Dojo, Saturday, 4/27/2024 @10 AM ET
      27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. 
      I'll be posting a couple more tech sheets before Saturday so be sure to follow this event to keep up with the tech sheets we'll be going through. 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Consolidated Industries - forced air gas furance

Budget Appliance Repair

By Budget Appliance Repair
in DIY Appliance Repair Help

Recommended Posts

Budget Appliance Repair Sensei

Budget Appliance Repair

Posted
Posted

Looking for a complete draft inducer motor/blower/housing complete or just the exact replacement motor and blower wheel.

Looks like from my research Consolidated went out of business 1998-99 can't find any info on the net about this unit.

Mod# MBA060NH3RX

Ser# 950721116

If anyone can find the orignal part# for the complete draft inducer assembly then maybe I could convert that to something that is currently produced.

The #'s on the motor:

MagneTek

SER. 23G 75954R

MTR MOD JA1P082NS 401570

115Volt .9amp 3300rpm .030hp Rot. CWSE, Shaft= 1" x 5/16"dia.

Blower wheel: 1 3/16" thick, 4 3/4" round

Thanks for any help you can provide,

Link to comment
Share on other sites
  • Replies 4
  • Created
  • Last Reply
applianceman18007260692 Sensei

applianceman18007260692

Posted
Posted

Willie I called BO at johnstone supply here in mobile and gave him the model number and he gave me a part # 4026600 and told me he could have it in a few days,so if you have a johnstone supply near you they might can get it for you.

Link to comment
Share on other sites
Budget Appliance Repair Sensei

Budget Appliance Repair

Posted
  • Author
Posted

Thanks ApplianceMan.

I already order that part from UniversalMotors.com

They went by the motor# JA1P082NS which converted to their part# 959 which is suppose to be an exact replacement complete draft inducer blower assembly to replace a Consolidated Industries Part# 401570 -- I don't know if it will be the same as the complete unit I'm replacing but if it isn't I should still hopefully be able to install the motor and blower wheel into the customers blower cage/frame unit.

By the way, do you know of any place on the internet to look up parts for CI products?

Link to comment
Share on other sites
applianceman18007260692 Sensei

applianceman18007260692

Posted
Posted

they used to be called premier furnace company and they have had a lot of defective furnaces in california I was reading this http://www.consolidatedfurnaces.com/and thinking to myself they probably dont want to sell parts and are laying low!Heck you might even can get a new furnace out of them ,I dont know.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

Go to topic listing
×
×
  • Create New...