Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. 
      I'll be posting a couple more tech sheets before Saturday so be sure to follow this event to keep up with the tech sheets we'll be going through. 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Goodman CKL24-1M Evaporator coils


Matt_In_Michigan

Recommended Posts

Matt_In_Michigan

Here's the short version. This unit is in a rental. Tenants complained about water all over the floor in the laundry room. Simple enough, clogged drain pan line. Cleared the line, still leaking. Drain pan was rusted through. Fabbed a new drain pan to sit under the old one complete with new drain. No more water leaks, but the coils keep freezing up. I pulled the new pan, ran it, no freeze up. I blew out the coils, inside and outside. WTF did I miss?

 

Thanks in advance,

 

Matt

Link to comment
Share on other sites

  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • Matt_In_Michigan

    2

  • BryanS

    1

Popular Days

Top Posters In This Topic

Matt_In_Michigan

LOL, yes the first pan was too big. I left that part out. The second one was about 1/4" wider and about 1" shorter.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...