Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Inglis fridge M# IPT164302


RiverviewAppliance

Recommended Posts

RiverviewAppliance

I need the tech sheet and any other relevant information. Thanks.

Link to comment
Share on other sites

this is just a standard whirlpool top mount with adc board..... to enter manual defrost, unplug unit for at least 30 seconds, then turn thermostat to "off"... plug unit back in and defrost should begin.

compatible with a Roper RT18BKXKQ03 tech sheet http://appliantology.org/files/file/2299-roper-rt18bkxkq03-refrigerator-tech-sheet/

  • Like 1
Link to comment
Share on other sites

 to enter manual defrost, unplug unit for at least 30 seconds, then turn thermostat to "off"... plug unit back in and defrost should begin.

 

 

"SHOULD", if the defrost t-stat is bad then it won't start the defrost.

 

RANT: and why the hell do they put the test plug in the freezer compartment where it gets buried in the ice, (whould be so much nicer if they put it in the the control area with the defrost timer or ADC board then you could get easy access to it to jump and/or test the defrost t-stat without having to remove all the ice around it first - on the side x sides they have the test plug in the control area why not the top mounts?).

  • Like 1
Link to comment
Share on other sites

×
×
  • Create New...