Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

how often to "force defrost" while waiting on new jazz board


bingo

Recommended Posts

I have an Amana ABD2233DES refrigerator with a bottom mount freezer. Fridge compartment was warm, compressor was running and the damper was open no air was coming in. Fridge had some ice on the center-rear of its floor (like where the cold air should have been coming up from the freezer compartment. Freezer had a lot of ice frost buildup on coils. 
Thanks to the videos I discovered the tech sheet and put it into service test mode. Defrost Thermostat was S" for open. I observed the damper door opening and closing.

I put it into forced defrost mode. Compressor shut off and the defroster heating rod came on. There was so much ice I had to go through about 7-8 forced defrosts and I used a heat gun to melt. 

I have ordered a new jazz board. My question is: While I am waiting for my board I need to continue to use the fridge and I'd rather not have to throw away any more food!  My plan is just to force defrost at least 1x per day. But then I realized that I have no idea if that will be enough! I guess I never really noticed/paid attention to the defrost cycles before so how do I know if the defrost cycle is continuing to fail to initiate on its own? About how often does a fridge operating properly, defrost?

If I find that there is a bunch of frost buildup and/or the fridge isn't keeping cool - can someone point me to the way to do a longer/deeper forced defrost?

Is doing manual forced defrosts until my board shows up in a week a wise strategy?

thanks all, 
Steve

Link to comment
Share on other sites

  • Team Samurai

If you really want to be sure you're starting off with a frost-free evaporator, you'll need to disassemble the freezer and clear the coil with a steamer then re-assemble. Here a couple videos that may help:

and another here: 
  • Like 1
Link to comment
Share on other sites

  • 3 weeks later...

I just had this problem, and I found that doing a regular "short" forced defrost mode once a week was sufficient to keep my fridge working.

Actually, we had to leave town for nearly two weeks, and I did a double forced defrost mode two days in a row, and the the fridge stayed cold for the whole two weeks.  It probably helped that there was no one home to open the freezer compartment during that time.

 

Link to comment
Share on other sites

8 hours ago, PghMike said:

 It probably helped that there was no one home to open the freezer compartment during that time.

 

Certainly,  door openings are counted as part of the algorithm in determining length and frequency of the defrost cycle.  However,  in this instance,  once a day or every other day should suffice but only after removing existing frost as Samurai advises. 

  • Like 2
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...