Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

KitchenAid Dishwasher


Robert Blandford

Recommended Posts

Robert Blandford

Dishwasher was making a groaning sound and based on other site recomendations i ordered the circulation motor.  It eventually stoped working now all together.  I replaced the motor and the dishwaser is still not working.  Any suggestions?  Model number is:KUDS02SRBL1

Link to comment
Share on other sites

  • Team Samurai
2 hours ago, LI-NY Tech said:

Is it filling with water?

 

2 hours ago, Robert Blandford said:

No it is not

You "fixed" the wrong problem! 

Why did you replace the circulation pump if it wasn't filling with water?

Link to comment
Share on other sites

5 hours ago, Robert Blandford said:

No it is not

Ok, the "groaning sound" may be the inlet valve buzzing.  You'll need to test for power to the inlet valve, if it's getting voltage but not letting water in, and you're certain that you have water up to the inlet valve (from the house), then the valve is faulty.

 

Part number: AP4369607

Part number: AP4369607

 

 

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...