Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Jenn-Air Electric Range Model SVE47500b


rockhopper46038

Recommended Posts

rockhopper46038

Gentlemen, I could use some help. I have a pretty old Jenn-Air model# SVE47500b electric range that has not functioned properly for some time and I finally decided to try and fix it. The stovetop elements all work fine, but the front display is completely blank. Pressing the membrane buttons on the front results in "beeps" but nothing else. I did some research and ordered a relay control board (the small board on the back of the oven behind the stamped cover) but when I replaced that board it had no effect on the problem. I then replaced the clock board in the front of the unit and lo and behold I have a working display! However, when i pressed the "bake" button and input a temperature of 350 degrees (or really, any number), i almost immediately get an error code of "F5" and a continuous "beep" until I press "cancel" on the membrane keypad. Stove top elements still work fine, but oven doesn't heat up at all - I just get that error code.

Anything else I can try, or do i need to call in a repair technician?  I'm wasn't quite ready to replace the oven yet (was going to wait until i did a kitchen remodel) and while I can return the relay control board (the old one performs indistinguishably from the new one), keeping the clock board means I've got a little under $300 into this repair and unless I can fix it for less than about $500 total I think I might just be looking at a replacement oven...

Link to comment
Share on other sites

rockhopper46038

Reading some of the other posts on the SVE47500b is it possible that I need to add a jumper between pin 5 and pin 15 on the new clock board? The "F5" code does reference some sort of "watchdog circuit disagreement"...

Link to comment
Share on other sites

rockhopper46038

Just got this part and tried it without any luck. Still f5 fault code. It is possible that it took a little longer to fault out, because I saw the "preheat" words appear this time and I didn't think I saw those before, but in the end about 5-10 seconds after touching "bake" and inputting a value (350) I still get the beeping f5 fault.

Any other ideas?

Link to comment
Share on other sites

richseattle56

I will upload the service manual to pot luck. Look for 16010191 SVD48600P Jenn Air Slide in Range.pdf

  • Like 1
Link to comment
Share on other sites

F5 error is a int. or defective oven sensor.

Ohm out sensor at control board. youll be looking for around 950-1000 ohms.

double check your connections

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...