Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Fflg2022mw3 service manual / tech sheet


Nycpas

Recommended Posts

Manufacturer: Frigidaire
Type of Appliance: Laundrycenter
Model Number: Fflg2022mw3
Have you validated the model number at an online parts site like Repair Clinic? (yes or no): Yes
Have you watched the video on how to search for manuals and have you searched the Downloads section prior to posting this request? (yes or no): Yes

Tech sheet when I looked it up was incorrect, sheet listed is for range.  Any advice?

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • Samurai Appliance Repair Man

    2

  • Nycpas

    2

Top Posters In This Topic

  • Team Samurai

Uses the same tech sheet as this one for this model 

 

Link to comment
Share on other sites

  • 1 month later...

unit is giving slow drain code but unit pumps out right away.  Tested amps on pump and it was low, changed pump even though I was happy with rate of drain and still same issue.

unit spins very slowly if at all.  Motor and tachometer are within spec for ohms.  changed motor control per tech sheet and unit worked for 2 weeks and now back at it again.  I am noticing some oil dripping down shaft near bearing but this is not a transmission model shaft motor and belt.  very puzzled and considering re ordering speed board under warranty.  

Link to comment
Share on other sites

  • Team Samurai

This forum is for service manual requests. Start a new topic on this in the Laundry forum and we'll help you troubleshoot there. 

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.

×
×
  • Create New...