Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Bosch SHX3AM05UC DW what is this fault code?


Paige Colbert Van Otten

Recommended Posts

Paige Colbert Van Otten

Using these instructions, "Press and hold “<” and “>”buttons, then turn dishwasher on. Regular Wash light will flash and Quick Wash light will be lit. Press “>” button to start program. Only highest priority fault code will show" I have received the following error code: active and clean are blinking, rinse is steadily lit. Anyone know what this one means? 

Thank you! 

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • Paige Colbert Van Otten

    3

  • johntech

    1

Active clean and sanitize are used for error codes the rinse is not. Active and clean blinking is a drain pump error

Link to comment
Share on other sites

Paige Colbert Van Otten

Perfect - thanks! That's what I suspected so I ordered a new drain pump last night. 

Link to comment
Share on other sites

Paige Colbert Van Otten

Replaced the pump last night and it worked! Thanks again

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...