Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Miele G892 SCU Plus F06 Too few pulses at flow meter/start of water intake


AllPhase

Recommended Posts

I've got a Miele G892 SCU Plus, and I'm getting an F06 error code:  Too few pulses at flow meter/start of water intake

what pulses? does anyone have a service manual? All i'm finding online is it could be the flowmeter board or the WPS. 

Is Miele the only source for parts?

Link to comment
Share on other sites

  • Replies 1
  • Created
  • Last Reply

Top Posters In This Topic

  • northeastappliance

    1

  • AllPhase

    1

Top Posters In This Topic

As the unit fills, water passes through the flow meter that has a little wheel in it. Magnets are attached to that wheel. Each time the magnet passes the flow meter board it creates the "pulse". The computer is looking for a certain number of pulses per fill cycle ( I can't tell you how many because I don't know). So some things to look at are:

-the waterproof system. Is it allowing water into the dishwater or is it humming and not letting water in?

-where the wps attaches to the water supply, there is a small screen. Make sure that is not clogged/restricted. 

-if it is filling with water, what is the water level in relation to the handle on the triple filter when the unit faults out?

-also take a look at the flow meter/ flow meter board(both are located in the water diverter on the side). I've seen the board move back a little bit so it was not reading correctly. 

-lastly check connections and wiring. 

This should get you off to a good start. Check all the above and let us know what you fine. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...