Jump to content
Click here to check out this guide.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. The tech sheet and the questions are posted in the comments section below.
      Your mission, if you should choose to accept it, is to check out the questions for each one and try to answer them ahead of time. Then come to the Dojo to see how well you did! 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Kenmore refrigerator model 79572093311


Tony2112

Recommended Posts

Coil was frozen with ice in the freezer compartment , the ice maker on the door is not making ice , had code of ER FF so I replaced the evaporator fan motor cause it was making noise as well . But now it still is not making ice but no noise at all . Please help 

Link to comment
Share on other sites

  • Replies 6
  • Created
  • Last Reply

Top Posters In This Topic

  • Tony2112

    5

  • Hiroshi

    2

Popular Days

Top Posters In This Topic

1 minute ago, Tony2112 said:

yes I did defrost it with a hair dryer .

I noticed its 2 fans in the freezer I'm not sure if the other fan is not working or if it's the computer board .

Link to comment
Share on other sites

1 hour ago, Hiroshi said:

Did you defrost the frozen area before replacing the fan motor?

yes I did defrost it with a hair dryer 

I noticed its 2 fans in the freezer I'm not sure if the other fan is not working or if it's the computer board .

 
Link to comment
Share on other sites

One fan is for circulating air through-out the whole machine, one is for blowing air into the icemaker area... If you didn't find the original part responsible for the defrost failure, it is probably frosting up again and slowing/stopping proper air flow

Link to comment
Share on other sites

1 minute ago, Hiroshi said:

One fan is for circulating air through-out the whole machine, one is for blowing air into the icemaker area... If you didn't find the original part responsible for the defrost failure, it is probably frosting up again and slowing/stopping proper air flow

Ok thx I'm gonna check it again to see if the other fan is working . Thx so much 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...