Jump to content
Click here to check out this guide

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Sub-Zero 642/S - Freezer too cold


brk

Recommended Posts

Freezer temp set to "0".  Temperature display is "-14".  Units are correct.  Ice cream is frozen rock hard, which is how the problem was identified.

Where to start?

Link to comment
Share on other sites

Found a wiring diagram.  Unplugged the purple wire from the control board, the compressor on the freezer stopped immediately.

So, I assume it's the control board?

Based on model number / serial number, do I have a 642, 642-2, or 642-3?

 

 

Link to comment
Share on other sites

First thing you would want to do is test the resistance of the thermistor in the freezer compartment, unplugging a random wire doesn't prove anything from a diagnostic standpoint...There should be literature in a manila envelope somewhere in the machine compartment of the unit, you can also call Sub-Zero and they will help you as their tech-line is very open. The computer controls are extremely reliable in these fridges, so I would do extra homework before buying a new part...

Sub Zero goes entirely upon serial number and the parts are only available through specific sources... Try this page:  http://www.midwestdistributing.com/Store/OpenPages/ManualPage.aspx?PageTitle=MANUALS

Link to comment
Share on other sites

Thanks. I did find a wiring diagram and the purple wire is the one that goes to the freezer compressor. I should've mentioned why I selected the purple wire :)

From the parts list, it looks like there is a relay on the compressor. I've found some reports that relay sometimes sticks. If that relay was stuck, a disconnect from the control board would still leave the compressor running?

 I'm also assuming it's not the thermistor. Because the temperature display for the freezer section appears correct. 

 Now the interesting part. After unplugging the unit to plug the purple wire back into the control board, everything is working properly again.

 Guess I'll just wait until it stops working one more time .

Link to comment
Share on other sites

Hmmm, weird... I am uncertain how a PTC relay could "stick."

I sure hope they didn't switch to the fake PTC electronic start relays...

To answer the question though, NO, if you remove L1 power from the compressor it cannot stay running.

 

Edited by Hiroshi
Link to comment
Share on other sites

  • 2 years later...

The freezer went into super-freeze mode again.  Identified by rock hard ice cream.  Display read -15 on the freezer side.

This time I hit the "on/off" button on the control panel.  Lights, display, and fans went off.  However...  the compressor kept running???

I have it plugged into a power monitor - it was pulling just over 1A.  With the system "off".

I then pulled the plug from the wall.  All stopped (thank goodness).  Waited a few minutes, plugged back in.  Now it's headed back towards the proper temp.

Suggestions?  It's happened about once per year +/-.

Link to comment
Share on other sites

Sounds like you have an intermittent sticking relay for the freezer compressor on the main board.

New main board would most likely take care of your problem, but I'm not really familiar with Sub-Zero, (some of the older - I think 500 series used time delay relays for the compressors).

  • Thanks 1
Link to comment
Share on other sites

  • 1 year later...
On 9/9/2019 at 9:43 PM, brk said:

The freezer went into super-freeze mode again.  Identified by rock hard ice cream.  Display read -15 on the freezer side.

This time I hit the "on/off" button on the control panel.  Lights, display, and fans went off.  However...  the compressor kept running???

I have it plugged into a power monitor - it was pulling just over 1A.  With the system "off".

I then pulled the plug from the wall.  All stopped (thank goodness).  Waited a few minutes, plugged back in.  Now it's headed back towards the proper temp.

Suggestions?  It's happened about once per year +/-.

I had the same symptoms on a Sub-Zero 700TC, and fixed it the same way. Except I went to the fuse box to turn it off completely instead of unplugging from the wall. Thank you!

Link to comment
Share on other sites

I ended up replacing the main board. I was experiencing several strange symptoms. 
 

the deep freeze hasn’t returned. But it was so infrequent I wouldn’t know if it is really solved. 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...