Jump to content
Click here to check out our on-demand appliance repair training webinars.

FAQs | Repair Videos | Academy | Newsletter | Contact


DISCLOSURE: We may earn a commission when you use one of our coupons/links to make a purchase.
  • Upcoming Events

    • 30 March 2024 02:00 PM Until 03:00 PM
      0  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological: bidness, customers, tools, troubleshooting, flavorite brewski, whatever. Webcams and microphones are open and live!
      This workshop is also a great time for any students at Master Samurai Tech to bring any and all questions about the coursework. We're happy to walk through any concepts you're having trouble with. Think of it like office hours with your teachers. 
      If you have a specific appliance problem you'd like us to talk about, post it here! We need a problem statement and a PDF of the tech sheet or schematic so we can all see it on screen share. If you have a PDF that isn't already in the File library here at Appliantology, send it to us by attaching it to the contact form. 
      Also, follow this Calendar Event so you'll get notified of new posts here. Look for the "Follow" button either at the top of the topic on desktop or below the topic on mobile.
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, March 30 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

Whirlpool Oven SF315PEMW1


Mike P.

Recommended Posts

 

Whirlpool Oven SF315PEMW1

Oven Died in middle of Thanksgiving Turkey, Stovetop still works.
Control board Display Dead, 3 Capacitors Burst.

Installed new Control Board, simple install 2 screws (not counting back cover) 3 unique connectors.
Lights up with 12:00 displayed for time.
Keypad responds as expected to all input. beeps when keys pressed. up down keys change time, timer and temp.
Set time to 11:28 (Accurate at the time), hit start flashing : goes steady
20 min later time still shows 11:28
Set timer to 5:00 hit start - stays at 5:00
Set oven to 350, hit start, time shows 10:00 (preheat time) stays at 10:00 oven does not start
tried broiler display shows 510 (temp?) oven does not start.

I tried many variations of keystrokes, even read the manual, but it seemed the timer never started therefore
none of the subsequent functions were initiated. At this point I assumed the DIY conclusion "They sent me a bad part"

They overnighted a new board, Same results.
Further aimless troubleshooting -
 No error codes ever displayed
 Tried unplugging then re plugging
 checked voltage in -123vAC
Unplugged Oven connector leaving power to Board ( No change)

Could this be 2 bad boards with the same defect - Unlikely
Could this be operator error - yes, but what could I be missing???
Could this be installed incorrectly? I guess! but the wiring harness is pretty foolproof, 3 unique connectors only fit one way
Could it be the wrong part? Possible but not likely, although the display is an exact match for the original boards, they are
 pretty obviously a different revision of the board (no longer uses the 3 capacitors that were on the old board).
 But this is the part number recommended when doing a part search by model number, and the part is packaged with
 "Whirlpool Corp Factory certified parts"

Any thoughts or questions, please reply

Link to comment
Share on other sites

  • Replies 3
  • Created
  • Last Reply

Top Posters In This Topic

  • Mike P.

    2

  • BradE

    1

  • Hiroshi

    1

Top Posters In This Topic

OEM Part - Manufacturer #WP6610444

This is the part number on the repairclinic site and on the label with the Whirlpool label as well

thanks for responding.

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...