Jump to content
Click here to check out our structured, online appliance repair training courses for rookies and experienced techs.

FAQs | Repair Videos | Academy | Newsletter | Contact


  • Upcoming Events

    • 27 April 2024 02:00 PM Until 03:00 PM
      5  
      All Appliantology tech members are invited to join in this workshop on all things Appliantological. 
      We have a special session planned for this one. Instead of the usual Show 'n Tell on a technical topic, we're going to post tech sheets in the comments to this Calendar Event (scroll down to see what's posted so far) and ask specific questions that can only be answered by reading the tech sheet. If you at least try to answer the questions beforehand, you'll get a lot more out of it. 
      I'll be posting a couple more tech sheets before Saturday so be sure to follow this event to keep up with the tech sheets we'll be going through. 
      Who: This workshop is only available to tech members at Appliantology.
      When: Saturday, April 27 @10:00 AM Eastern Time.
      Where: Online via Zoom
      How:
      Click here to go to the forum topic with the registration link. If you're interested, register now. Arrive a couple minutes early to make sure your connection is working. Set a reminder for yourself for this workshop so you don’t miss it.  And check out past workshops here: https://appliantology.org/announcement/33-webinar-recordings-index-page/

New Appliance Service Manual added: Frigidaire FGHB2866PF6 Refrigerator Tech Sheet


Lighthouse

Recommended Posts

  • 4 months later...
  • Replies 2
  • Created
  • Last Reply

Top Posters In This Topic

  • Samurai Appliance Repair Man

    1

  • Lighthouse

    1

  • good job repair

    1

good job repair

NEED HELP /

COMPRESSOR IS NOT WORKING.

CHECK INVERTOR BOARD CONNECTOR HAS 120VAC IN BUT NOT 240VAC OUT.

CHK THE OHM OUT AT EACH PINS AT COMPRESSOR WHICH IS OK. NO OPEN/  NO SHORT

THE INVERTER BOARD IS MADE BY PANASONIC P# MCBE2UN.

I COULD NOT FIND THE INVERTER BOARD.

I EVEN ORDERED THE COMPRESSOR THAT COME W INVERTER BOARD

WHICH IS DIFFERENT.

I REPLACED INVERTER BOARD. COMPRESSOR STILL NOT WORKING

ANY SUGGESTION??

 

JASON

GJR, LLC

Link to comment
Share on other sites

  • Team Samurai

Hi Jason, welcome to Appliantology!

To get help, start a new topic in the Kitchen forum. 

Also, watch the orientation videos on this page to get the most out of your Appliantology membership.

Link to comment
Share on other sites

×
×
  • Create New...